Linh, Have you tried scan disk from DOS? Hit F8 about three seconds into boot(press it a couple times in sequence). Select command prompt only, then type scandisk, enter. Also, see if your computer will boot in safe mode and check your devices for errors. Jeff
FAX 717-564-4952 Jeff Dougherty Intrepid Video & Electronics Be careful of your thoughts. 501 Luther Rd They may become your words Harrisburg, PA 17111 any moment. 717-909-8844 VCR tips, electronics info & general interest. www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com www.9-11-2001tragedy.com ----- Original Message ----- From: "Tran Tuan Linh" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, June 23, 2002 5:03 PM Subject: PCWorks: System halts at POST > Hi everybody, > I am running Win 95B, Pentium 200Mhz, HDD 20 GB > When I turn the PC on, the HDD led lights up continuously indicating that > the hard disk drive is working frantically. But that's all what takes place, > the whole system is stuck forever right there. I have to push the power > button off and on about four or five times and then things suddenly return > to normal. This has been going on for over one week. > What could be the cause of this and what should I do now? > Thank you very much in advance for your help. > With best regards, > Linh (first name, Vietnam) ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
