Hugh:
I found that I had Matrox Graphics
MAG-G200AGP on my motherboard.
I installed the Matrox Graphics drivers from
the WIN 98SE disc And I can now adjust the
resolution as I wish.
Wally
On Mon, 30 Oct 2006 03:18:20 -0500 Hugh Vandervoort <[EMAIL PROTECTED]>
writes:
> You've lost your video drivers.
> Re-install the drivers and all should be well.
>
>
> [EMAIL PROTECTED] wrote:
> > I am running windows 98 SE with a MultiSync
> > monitor. When I go to control panel \ display and then
> > the settings tab, the slider is locked in the 640 x 480
> > position and will not move.
> >
> > I recall that someone had this problem in the past
> > and there was a simple answer for it. I just do
> > not recall what it was. Can anyuone help?
> >
> > Wally
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
