Sue,

It's actually not that tough. His phone line is probably a tan color with 4
insulated wires inside of it. An individual phone line only uses 2 wires so
there is a possibility of having 2 lines at any residence. Only 2 of those
wires will be "active" or "turned on" from the phone company since he only
has one phone. Normally, those colors are red and green and are the ones to
be concerned about. There will also be wires of yellow and black color but
normally those aren't used, only for a second phone line at the same
residence...(teen phone, etc.) All these wires are inside of the tan sheath.
Depending on what you want to do, you will at least need a phone jack that
can be purchased many places, Radio Shack, Walmart, Target, Lowes, Home
Depot etc....You could cut his existing phone line and wire in the jack
while also wiring back in the original phone if need be. These jacks usually
have screw terminals on the back of them that are color coded. You just have
to strip the insulating cover off the wires in the phone line that you just
cut and hook them to the appropriate terminal on the back of the jack. There
is a small AC voltage on the active wires but not enough to hurt you, at
least that's been my experience. Just don't let the wires touch each other
when you have the insulation stripped off of them and try not to touch 2
wires at the same time.

For more information, just google "how to install a phone jack"

HTH,

Roger Carnell

----- Original Message ----- 
From: "Sue Cubic" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, March 06, 2007 6:08 PM
Subject: PCWorks: How hard is it??


> To install a phone jack?
>
> I do volunteer work for a community organization that helps the
> elderly/disabled.  I've recently been assigned to help a man with poor
> hearing in one ear (deaf in the other) to obtain assistive
> technology.  We've got the special phone and ringer now, free from
> Verizon.  Problem is that there is no phone jack.  He has an old phone
that
> is hard-wired.  His house is old, and there is only that one phone.  The
> phone does not need electricity.
>
> I'm fairly handy with tools, but have no clue how to tackle a project like
> this.  Verizon will come and do it for a $100 service call.  Surely it
> doesn't cost anywhere near this much if one knew how to do it?
>
> Anyone know of any online sites where I can possibly see diagrams and
> learn?  I wouldn't even know what to buy, or even how to do a web search
(I
> don't know what to search for).
>
> Sue
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================

Reply via email to