Hey Doug,

Lots of race hazards going on there because you missed using triggers.

Also, sending the same value over so many sends-receive links causes 
problems.

See a slightly better way of doing this using select instead of route
and a matrix of on/off values for the spigots

a.


On Tue, 1 Apr 2008 23:17:22 +0100
Douglas Rouxel <[EMAIL PROTECTED]> wrote:

> Hi All,
> 
> I'm very sorry, this has almost certainly been brought up more than  
> once, and I'm very bad at this, I've been playing around with Pd for  
> a while just for non-critical applications like making fun little  
> noise machines and stuff, but I though I'd give a serious project a  
> go, and I have - but it's not going well...I'm trying to filter some  
> sysexdata, and I'm trying to keep my patch to only the standard  
> modules, although if there is one which will do this straight up then  
> I'll probably happily take it!
> 
> So the input I'm getting in goes along the lines of: 240 2 0 0  
> 0...247, I've managed to package up all the incoming stream of data  
> from the Sysex in (on OS X) so that bit is fine - I'm trying to  
> filter the information based on some of the content - specifically  
> the third item in the list (and then later the 5th item, but the  
> problem and process is the same.)
> 
> In the example, each of the messages at the top represents some  
> incoming data The message 240 2 0 0 0 247 should print to trk1 on the  
> console, if you press the message twice, it does what it should,  
> however if you press on 240 2 7 0 0 247 then it should output the  
> same to the console under trk8 - but it doesn't first time out it  
> prints it to trk1, then after that it goes to trk8.
> 
> I'm sure this is a simple thing and I'm just doing this plain wrong,  
> can someone perhaps give me a few pointers and let me know where I'm  
> going wrong!
> 
> Thanks in advance!
> 
> Doug
> 
> 
> 


-- 
Use the source

Attachment: alltrackfiltertestbed2.pd
Description: Binary data

_______________________________________________
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/listinfo/pd-list

Reply via email to