Hi thank you. I like that 4in one. But as i am in austie, shipping takes to long time.
anyway: I´ve a haupage Wintv, the driver are loaded with modprobe and lsmod shows it correct loaded. if i switch through the channels, it just shows me a blue screen in pdp, and tells me that the frequency is not correct. Also Gem finds it, the same output, in fact nothing. Thank you again der.brandt > On Thursday 05 June 2008 15:22:03 Ctrl Alt Back wrote: >> On Thu, Jun 05, 2008 at 08:59:59PM +0200, [EMAIL PROTECTED] wrote: >> > thank you, sincerely >> > >> > I got one but this does not work, can't get any picture. gem and PDP >> find >> > it but dispkay no picture. and i willing to spent some money, in order >> to >> > get it work >> >> you have any further details ? like : >> what card you got >> what you are trying with it ? >> driver loaded ? >> try to run tvtime first on your card, go to menu > input configuration, >> select source composite 1, if it works, will work on Pd as well. > > Good advice, these cards are susceptible to electrostatic shock (I have > lost a > couple over the years). I have had success with xawtv to test if video > input > worked. > > You could also try with gridflow. Do 'lsmod' and see if you have the > 'bttv' > driver loaded. You should also have a device /dev/video0 and make sure you > have the permissions ok... Try the irc channel if you want live > troubleshooting help (irc.freenode.net, channel #dataflow). > > Cheers, > > Alexandre > _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list