Am 22.07.2008 um 15:31 schrieb Atte André Jensen:
Hi
I have assigned a knob on my bcr2000 to a vertical slider in pd. Under
the sliders properties, I have set send-symbol and receive-symbol to
"send" and "rec". I then have
[ctlin 1]
|
[/ 127]
|
[s rec]
[r send]
|
[* 127]
|
[ctlout 1]
This basically works, the upper one is receiving from the bcr and
moving
the fader in pd, the lower one is updating the display on the bcr when
the knob is moved in pd.
The problem is that pd sends it's send-symbol, even if the fader is
moved as a result of the receive-symbol. This means that the bcr get's
the value right back, with a small delay, which causes the whole to be
very reluctent to accept movements from the bcr.
I could make some logic that doesn't send the value back if it was
received from midi, but thought I'd ask if there was a simpler
solution?
i cant think of any....
probably you need to pit the send and receive out of the slider and
do something
with "t b b" and "spigot"...
but that would be what you call the "logic"....
cheers luigi
For instance is it possible to have pd's knobs *not* send it's
send-symbol if the fader was moved as a result of a receive-symbol?
--
peace, love & harmony
Atte
http://atte.dk | http://myspace.com/attejensen
http://anagrammer.dk | http://modlys.dk
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> http://lists.puredata.info/
listinfo/pd-list
>---------------------------------------<
Luigi Rensinghoff
[EMAIL PROTECTED]
skype:gigischinke
ichat:gigicarlo
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
