If you look at the arduino-help.pd or arduino-test.pd, the message
should be [digitalIns 1 1(. The first number is the port# and the
second is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins
8-13, PORT2==analog pins).
If you are using Arduino 0017, you might want to upgrade the included
Firmata library with the latest version (check the README for how)
http://at.or.at/hans/pd/objects.html#pduino
.hc
On Nov 19, 2009, at 6:16 AM, altern wrote:
hi
i am doing this small example to read a digital sensor with pduino.
i test it with an arduino program that reads pin 2 and writes it to
pin 13 and this works fine, i get a LED light on and off with my
infrared sensor.
however when i try this very same setup in PD i dont get it to work.
i am starting up arduino object to the right COM port, i can write
manually to pin 13 and the LED flashes, but i dont get anything from
pin 2. I have not used digital sensors for ages with PD so i dont
remember the right way to set them up.
I send this message to arduino
pinMode 2 0
i also tried sending before
digitalIns 1
but nothing comes from comport outlet. so i am not sure what i am
doing wrong
please help!
enrike
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
----------------------------------------------------------------------------
Computer science is no more related to the computer than astronomy is
related to the telescope. -Edsger Dykstra
_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
