Hi David, > P.S. Did you mean midi channel or midi port? The inlet to EWI-send is > for the midi port.
The midi port depends on your hardware. That cannot be known. The midi channel is 1 (like in Pd) however the EWI needs numbers between 0 and 15 while the common use of midi channels goes from 1-16 (like in Pd). So the patch needs to show "1" while it is transmitting "0" to the EWI. As far as the default values in general: Only a few of them are important to be set to a specific value. Two of them are the pitchbend settings which need to be set to 127. They do nothing at 124 or 125. I thought you tested this? (Although I have to admit that I have not updated the firmware or software within the last 6 months.) Ingo > -----Ursprüngliche Nachricht----- > Von: David [mailto:dfket...@gmail.com] > Gesendet: Montag, 14. März 2011 13:35 > An: Ingo > Cc: pd-list@iem.at > Betreff: Re: [PD] Patch for Akai EWI (was "Reading and writing binary > files") > > > On Mon, Mar 14, 2011 at 8:23 AM, David <dfket...@gmail.com> wrote: > > See below. > > > > On Mon, Mar 14, 2011 at 7:36 AM, Ingo <i...@miamiwave.com> wrote: > >> Hi David, > >> > >> I have not tested your patch so far but: > >> > >> Your default midi channel is "0" ??? > >> Your velocity default is 32 instead of "120" > >> default for breath_cc2 should be aftertouch and not "0" > >> default key delay should be "7" (not that this matters at all) but... > >> > >> pitchbend up / down needs to be "127" and not 124 / 125 as stated by > >> "www.ewi-usb.com". > >> > >> Didn't I mention there were errors on that website? > > > > Yes, you did tell me there were errors, but you didn't say what they > > all were. The only error you mentioned specifically was the need to > > send the NRPN message (and thanks for that). However, I looked at the > > files produced by the Garritan software, and they seemed to agree with > > the defaults on that web site, as far as I can remember. Maybe it > > depends on which version of the firmware and which version of the > > Garritan software you're using, I don't really know. In any case, they > > can be overridden, that's the whole purpose of writing this patch in > > the first place. > > > > As for the Midi channel, I'm not sure whether the first midi channel > > is supposed to be 0 or 1. It's just the default anyway, it's going to > > have to be changed, depending on how many midi devices you have > > attached, and in what order. > > > >> > >> Although I told that some of the stuff is incorrect and provided you > the > >> correct information you simply copy this wrong information and want to > >> publish it somewhere else with your own copyright??? > > > > The copyright isn't on the information from his web site (which I'm > > not reproducing anyway), it's on my PureData code, so I don't really > > understand what you're complaining about. > > > >> > >> Come on! > >> > >> Ingo > >> > >> > > _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
