a few more attempts, I have it working once again, with dropped frames. ... Stream 70] Expected 1748 data bytes, but got 948 [Stream 70] Expected max 1748 data bytes, but got 1908. Dropping... [Stream 80] Expected 1908 data bytes, but got 948 [Stream 80] Expected 1908 data bytes, but got 948 [Stream 70] Expected 1748 data bytes, but got 948 [Stream 80] Expected 1908 data bytes, but got 948 [Stream 70] Expected 1748 data bytes, but got 948 [Stream 70] Expected max 1748 data bytes, but got 1908. Dropping... [Stream 80] Expected 1908 data bytes, but got 948 [Stream 80] Expected 1908 data bytes, but got 948 [Stream 70] Expected 1748 data bytes, but got 948 [Stream 70] Expected max 1748 data bytes, but got 1908. Dropping... [Stream 80] Expected 1908 data bytes, but got 948 [Stream 70] Expected max 1748 data bytes, but got 1908. Dropping... [Stream 80] Expected 1908 data bytes, but got 948 [Stream 70] Expected 1748 data bytes, but got 948 [Stream 70] Expected max 1748 data bytes, but got 1908. Dropping... [Stream 80] Expected 1908 data bytes, but got 948 [Stream 80] Expected 1908 ... gr, Tim
2011/11/14 tim vets <timv...@gmail.com> > Hi all, > I tested with fux_kinect and a kinect connected now. Some results: > on the first test, fux_kinect-help.pd opens and the depth image appears, > though with some glitches/flickering (scrambled frames now and then) > The tilting also works. > Upon closing the patch, pd crashes. > On a second attempt (after this crash), the help patch freezes instantly. > Only the first frame of the depth image appears, and then pd hangs. > Attached is the output of "valgrind --leak-check=full pdextended" and > opening fux_kinect-help.pd. > Let me know if there's any more useful info I can produce. > gr, > Tim > > > 2011/11/12 tim vets <timv...@gmail.com> > >> in case anyone wants to try >> >> >> 2011/11/12 tim vets <timv...@gmail.com> >> >>> >>> >>> 2011/11/12 Mathieu Bouchard <ma...@artengine.ca> >>> >>>> Le 2011-11-12 à 18:56:00, tim vets a écrit : >>>> >>>> >>>> it's stretching my knowledge quite far now, >>>>> but gave it a shot anyway, and interpreted what you wrote as: >>>>> find the line " gl_frame_cond = (pthread_cond_t) >>>>> malloc(sizeof(pthread_mutex_t)**);" >>>>> (in fux_kinect.cpp) >>>>> and remove the "*" from that line. >>>>> >>>> >>>> Ok, never mind removing "*", put it back and just replace the struct >>>> name so that it matches : >>>> >>>> gl_frame_cond = (pthread_cond_t *) malloc(sizeof(pthread_cond_t))**; >>>> >>>> >>>> or am I getting it wrong? >>>>> >>>> >>>> Yes... and it's more changes than what I had listed... so nevermind >>>> that one. But surely the author would know what I mean. >>>> >>>> In the meantime, let's stick to the shortest possible fix. >>>> >>>> bingo >>> thanks :) >>> can't test with the Kinect connected yet though... >>> but at least pd does not hang anymore but instead just reports: >>> [fux_kinect]: kinect initiated >>> [fux_kinect]: Number of devices found: 0 >>> [fux_kinect]: Could not open device >>> gr, >>> Tim >>> >>> >>>> ______________________________**______________________________** >>>> __________ >>>> | Mathieu BOUCHARD ----- téléphone : +1.514.383.3801 ----- Montréal, QC >>>> >>> >>> >> >
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list