... and oops, I see that the thread got split - on the other thread, the solution from jack at rybn.org (using built-in Pd objects, notably |textfile|) also works, and is certainly the easiest way to get started.
cheers Miller On Thu, Feb 14, 2013 at 10:27:02AM -0800, Miller Puckette wrote: > Alternatively, and perhaps a bit easier, you could grab my gpio object > from http://crca.ucsd.edu/~msp/syllabi/206.13w/index.htm - it's very > unfinished, but basically you can use the "gpio" command to set the pins > up, then crank up Pd and use a |gpio| object to read or write them - it > works through the /sys/class/gpio/ mechanism and is fine for rates up to > about 1000 per second (so it's limited by Pd's scheduling resolution). > > cheers > Miller > > On Thu, Feb 14, 2013 at 05:26:20PM +0000, João de Brito Rocha Reis Vidigal > wrote: > > Hi guys! > > Is it too stupid to assume that I can get control of the GPIO via python > > and send the data to PD via pyata!? > > All I really need is to read a pushbutton! > > > > tks > > JV > > _______________________________________________ > > Pd-list@iem.at mailing list > > UNSUBSCRIBE and account-management -> > > http://lists.puredata.info/listinfo/pd-list > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list