I'm thinking this one XL-MaxSonar - WRM1 look forward to checking tutorials. What's your github address?
Cheers, Julian On 12 March 2013 14:35, Alexandre Saunier <saunier.alexan...@yahoo.com>wrote: > 'Power filters' are simple RC filters you can solder directly on the > sensor, they help eliminating electric noise. Since the analog output of > the sensor depends on the voltage with which it is fed, the cleaner the > supply voltage, the better the analog output. > I don't know which sensor you're gonna us, but assuming it works like the > MB1000 or MB1200, you will find a lot of useful tips inside the datasheet > and in the tutorial page. > > I'll start cleaning up my mess and a few short tutorials should be on my > github by this evening. > > Best, > Alex > > > ------------------------------ > *De :* Julian Brooks <jbee...@gmail.com> > ** > > Hi Alex, > > Many thanks for the info. > > What are 'power filters'? > > Yes on RPi, so tutorials would be very helpful. > > Best wishes, > > Julian > > > > On 12 March 2013 13:32, Alexandre Saunier <saunier.alexan...@yahoo.com>wrote: > > Hi Julian, > > As for the URF, I can't give you any infos but I've been using Maxbotix's > indoor sensors a few times. > > One thing you really want to take into acount is the fact that sensors > interract with each others, you therefore need to chain them properly. > You might want to take a look at power filters too. > Maxbotix's tutorial page has been quite useful to me so far. > > As to get the infos to pd, I've been using these sensors with a raspberry > pi. > My option has been to collect the data from the RPi's GPIO using python > and then send them to pd using OSC. > I'm starting to write small tutorials explaining what I've been through, > if you use the RPi too I'd be happy to point them to you. > > Have fun, > Alex > > > ------------------------------ > *De :* Julian Brooks <jbee...@gmail.com> > *À :* PD List <pd-list@iem.at> > *Envoyé le :* Mardi 12 mars 2013 13h58 > *Objet :* [PD] Ultrasonic Range Finder > > Hi, > > I'm after some advice: > > For an installation piece I'd like to do I'm investigating range finder > sensors (for outdoors). > > Has anyone experience of the Maxbotic URF's and any tips they'd like to > share for getting the data into Pd? > > Cheers, > > Julian > > _______________________________________________ > Pd-list@iem.at mailing list > UNSUBSCRIBE and account-management -> > http://lists.puredata.info/listinfo/pd-list > > > > > >
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list