Actually I never use the "autoget" system - I just cd to src and hit 'make -f makefile.gnu'.
But I think yes you ned tk8.5 devel, plus the alsa libraries (alsa-devel?) cheers M On Thu, May 23, 2013 at 09:34:45AM +0100, Julian Brooks wrote: > Hello Miller, > > Thanks for wading in with this. > > Failed here in 'make' (and hope I've included all the necessary info) > > mv -f .deps/stdout.Tpo .deps/stdout.Plo > /bin/bash ../../libtool --tag=CC --mode=link gcc -O6 -funroll-loops > -fomit-frame-pointer -module -avoid-version -shared -shrext .pd_linux > -L../../src -o stdout.la -rpath /usr/local/lib/pd/extra/stdout stdout.lo > -lpthread -ldl > libtool: link: gcc -shared -fPIC -DPIC .libs/stdout.o -L../../src > -lpthread -ldl -O6 -Wl,-soname -Wl,stdout.pd_linux -o > .libs/stdout.pd_linux > libtool: link: ( cd ".libs" && rm -f "stdout.la" && ln -s "../stdout.la" " > stdout.la" ) > make[3]: Leaving directory `/root/pure-data/extra/stdout' > make[3]: Entering directory `/root/pure-data/extra' > make[3]: Nothing to be done for `all-am'. > make[3]: Leaving directory `/root/pure-data/extra' > make[2]: Leaving directory `/root/pure-data/extra' > make[2]: Entering directory `/root/pure-data' > make[2]: *** No rule to make target `doc/5.reference/sublist-help.pd', > needed by `all-am'. Stop. > make[2]: Leaving directory `/root/pure-data' > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory `/root/pure-data' > make: *** [all] Error 2 > > Couple of (possibly dumb) questions > > Do I need to install tk8.5 (-dev or not)? > > When running './autgen.sh' > > Are these lines relevant: > libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and > libtoolize: rerunning libtoolize, to keep the correct libtool macros > in-tree. > libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. > > Don't have enough experience with building from source to know whether it's > being automagically sorted or they could do with a helping hand, or it's > just not important at all? > > It seems to me that the build process and instructions (INSTALL.txt) have > become simpler/clearer? If so, thank you. > > On the various RPi images I've been putting together, I have always had a > go at building (more for my own satisfaction) and given up in a huff when I > kept falling over at early stages. Then installing from raspbian repo's, > sticking on the pre-built most recent from your site and linking to ./pd > via bash. Works fine but isn't quite satisfactory somehow. > > Anyway. > > Hope we can get it going (I'm going to sit tight this time). > > Regards, > > Julian > > > > On 23 May 2013 04:09, Miller Puckette <m...@ucsd.edu> wrote: > > > Looks like x_array.c and x_scalar.c were missing from the file list in > > Makefile.am (I just added these files) - try to update the source and > > recompile now... > > > > cheers > > Miller > > > > On Thu, May 23, 2013 at 03:03:47AM +0100, Julian Brooks wrote: > > > Hi, > > > > > > Been wanting to do this for a while but it always keeps failing so could > > do > > > with some tips. > > > > > > I have the source from git > > > > > > git clone git:// > > pure-data.git.sourceforge.net/gitroot/pure-data/pure-data > > > > > > Then (as it's a minimal RPi image) have installed > > > automake (and dependencies: autoconf, autotools-dev, m4, libtool, > > gettext) > > > > > > Also added libasound2-dev and tk8.5-dev (not sure if tk required?) > > > > > > When running > > > > > > ./autogen.sh > > > then > > > ./configure > > > and finally > > > make (I ran make previously so much shorter bit before it fails. > > > > > > I get this: > > > > > > autoreconf: Entering directory `.' > > > autoreconf: configure.ac: not using Gettext > > > autoreconf: running: aclocal --force -I m4/generated -I m4 > > > ^[[B^[[Bautoreconf: configure.ac: tracing > > > autoreconf: configure.ac: adding subdirectory portaudio to autoreconf > > > autoreconf: Entering directory `portaudio' > > > autoreconf: configure.in: not using Gettext > > > autoreconf: running: aclocal --force > > > autoreconf: configure.in: tracing > > > autoreconf: configure.in: subdirectory bindings/cpp not present > > > autoreconf: running: libtoolize --copy --force > > > libtoolize: putting auxiliary files in `.'. > > > libtoolize: copying file `./ltmain.sh' > > > libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.inand > > > libtoolize: rerunning libtoolize, to keep the correct libtool macros > > > in-tree. > > > libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. > > > autoreconf: running: /usr/bin/autoconf --force > > > autoreconf: configure.in: not using Autoheader > > > autoreconf: configure.in: not using Automake > > > autoreconf: Leaving directory `portaudio' > > > libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `m4/config'. > > > libtoolize: copying file `m4/config/ltmain.sh' > > > libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4/generated'. > > > libtoolize: copying file `m4/generated/libtool.m4' > > > libtoolize: copying file `m4/generated/ltoptions.m4' > > > libtoolize: copying file `m4/generated/ltsugar.m4' > > > libtoolize: copying file `m4/generated/ltversion.m4' > > > libtoolize: copying file `m4/generated/lt~obsolete.m4' > > > autoreconf: configure.ac: not using Autoheader > > > autoreconf: running: automake --add-missing --copy --force-missing > > > autoreconf: Leaving directory `.' > > > root@BitChime:~/pure-data# ./configure > > > checking for a BSD-compatible install... /usr/bin/install -c > > > checking whether build environment is sane... yes > > > checking for a thread-safe mkdir -p... /bin/mkdir -p > > > checking for gawk... no > > > checking for mawk... mawk > > > checking whether make sets $(MAKE)... yes > > > checking build system type... armv6l-unknown-linux-gnueabihf > > > checking host system type... armv6l-unknown-linux-gnueabihf > > > configure: iPhone SDK only available for arm-apple-darwin hosts, skipping > > > tests > > > configure: Android SDK only available for arm-linux hosts, skipping tests > > > checking for style of include used by make... GNU > > > checking for gcc... gcc > > > checking whether the C compiler works... yes > > > checking for C compiler default output file name... a.out > > > checking for suffix of executables... > > > checking whether we are cross compiling... no > > > checking for suffix of object files... o > > > checking whether we are using the GNU C compiler... yes > > > checking whether gcc accepts -g... yes > > > checking for gcc option to accept ISO C89... none needed > > > checking dependency style of gcc... gcc3 > > > checking how to print strings... printf > > > checking for a sed that does not truncate output... /bin/sed > > > checking for grep that handles long lines and -e... /bin/grep > > > checking for egrep... /bin/grep -E > > > checking for fgrep... /bin/grep -F > > > checking for ld used by gcc... /usr/bin/ld > > > checking if the linker (/usr/bin/ld) is GNU ld... yes > > > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B > > > checking the name lister (/usr/bin/nm -B) interface... BSD nm > > > checking whether ln -s works... yes > > > checking the maximum length of command line arguments... 1572864 > > > checking whether the shell understands some XSI constructs... yes > > > checking whether the shell understands "+="... yes > > > checking how to convert armv6l-unknown-linux-gnueabihf file names to > > > armv6l-unknown-linux-gnueabihf format... func_convert_file_noop > > > checking how to convert armv6l-unknown-linux-gnueabihf file names to > > > toolchain format... func_convert_file_noop > > > checking for /usr/bin/ld option to reload object files... -r > > > checking for objdump... objdump > > > checking how to recognize dependent libraries... pass_all > > > checking for dlltool... dlltool > > > checking how to associate runtime and link libraries... printf %s\n > > > checking for ar... ar > > > checking for archiver @FILE support... @ > > > checking for strip... strip > > > checking for ranlib... ranlib > > > checking command to parse /usr/bin/nm -B output from gcc object... ok > > > checking for sysroot... no > > > checking for mt... mt > > > checking if mt is a manifest tool... no > > > checking how to run the C preprocessor... gcc -E > > > checking for ANSI C header files... yes > > > checking for sys/types.h... yes > > > checking for sys/stat.h... yes > > > checking for stdlib.h... yes > > > checking for string.h... yes > > > checking for memory.h... yes > > > checking for strings.h... yes > > > checking for inttypes.h... yes > > > checking for stdint.h... yes > > > checking for unistd.h... yes > > > checking for dlfcn.h... yes > > > checking for objdir... .libs > > > checking if gcc supports -fno-rtti -fno-exceptions... no > > > checking for gcc option to produce PIC... -fPIC -DPIC > > > checking if gcc PIC flag -fPIC -DPIC works... yes > > > checking if gcc static flag -static works... yes > > > checking if gcc supports -c -o file.o... yes > > > checking if gcc supports -c -o file.o... (cached) yes > > > checking whether the gcc linker (/usr/bin/ld) supports shared > > libraries... > > > yes > > > checking whether -lc should be explicitly linked in... no > > > checking dynamic linker characteristics... GNU/Linux ld.so > > > checking how to hardcode library paths into programs... immediate > > > checking for shl_load... no > > > checking for shl_load in -ldld... no > > > checking for dlopen... no > > > checking for dlopen in -ldl... yes > > > checking whether a program can dlopen itself... yes > > > checking whether a statically linked program can dlopen itself... no > > > checking whether stripping libraries is possible... yes > > > checking if libtool supports shared libraries... yes > > > checking whether to build shared libraries... yes > > > checking whether to build static libraries... yes > > > checking for gcc... (cached) gcc > > > checking whether we are using the GNU C compiler... (cached) yes > > > checking whether gcc accepts -g... (cached) yes > > > checking for gcc option to accept ISO C89... (cached) none needed > > > checking dependency style of gcc... (cached) gcc3 > > > checking for g++... no > > > checking for c++... no > > > checking for gpp... no > > > checking for aCC... no > > > checking for CC... no > > > checking for cxx... no > > > checking for cc++... no > > > checking for cl.exe... no > > > checking for FCC... no > > > checking for KCC... no > > > checking for RCC... no > > > checking for xlC_r... no > > > checking for xlC... no > > > checking whether we are using the GNU C++ compiler... no > > > checking whether g++ accepts -g... no > > > checking dependency style of g++... none > > > checking whether make sets $(MAKE)... (cached) yes > > > checking whether ln -s works... yes > > > checking for dlopen in -ldl... (cached) yes > > > checking for cos in -lm... yes > > > checking for pthread_create in -lpthread... yes > > > checking for ANSI C header files... (cached) yes > > > checking sys/soundcard.h usability... yes > > > checking sys/soundcard.h presence... yes > > > checking for sys/soundcard.h... yes > > > checking CoreAudio/CoreAudio.h usability... no > > > checking CoreAudio/CoreAudio.h presence... no > > > checking for CoreAudio/CoreAudio.h... no > > > checking for snd_pcm_info in -lasound... yes > > > checking for size_t... yes > > > checking for working alloca.h... yes > > > checking for alloca... yes > > > checking fcntl.h usability... yes > > > checking fcntl.h presence... yes > > > checking for fcntl.h... yes > > > checking limits.h usability... yes > > > checking limits.h presence... yes > > > checking for limits.h... yes > > > checking malloc.h usability... yes > > > checking malloc.h presence... yes > > > checking for malloc.h... yes > > > checking netdb.h usability... yes > > > checking netdb.h presence... yes > > > checking for netdb.h... yes > > > checking netinet/in.h usability... yes > > > checking netinet/in.h presence... yes > > > checking for netinet/in.h... yes > > > checking stddef.h usability... yes > > > checking stddef.h presence... yes > > > checking for stddef.h... yes > > > checking for stdlib.h... (cached) yes > > > checking for string.h... (cached) yes > > > checking sys/ioctl.h usability... yes > > > checking sys/ioctl.h presence... yes > > > checking for sys/ioctl.h... yes > > > checking sys/param.h usability... yes > > > checking sys/param.h presence... yes > > > checking for sys/param.h... yes > > > checking sys/socket.h usability... yes > > > checking sys/socket.h presence... yes > > > checking for sys/socket.h... yes > > > checking for sys/soundcard.h... (cached) yes > > > checking sys/time.h usability... yes > > > checking sys/time.h presence... yes > > > checking for sys/time.h... yes > > > checking sys/timeb.h usability... yes > > > checking sys/timeb.h presence... yes > > > checking for sys/timeb.h... yes > > > checking for unistd.h... (cached) yes > > > checking for int16_t... yes > > > checking for int32_t... yes > > > checking for off_t... yes > > > checking for pid_t... yes > > > checking for size_t... (cached) yes > > > checking for error_at_line... yes > > > checking vfork.h usability... no > > > checking vfork.h presence... no > > > checking for vfork.h... no > > > checking for fork... yes > > > checking for vfork... yes > > > checking for working fork... yes > > > checking for working vfork... (cached) yes > > > checking for stdlib.h... (cached) yes > > > checking for GNU libc compatible malloc... yes > > > checking for stdlib.h... (cached) yes > > > checking for GNU libc compatible realloc... yes > > > checking return type of signal handlers... void > > > checking for dup2... yes > > > checking for floor... no > > > checking for getcwd... yes > > > checking for gethostbyname... yes > > > checking for gettimeofday... yes > > > checking for memmove... yes > > > checking for memset... yes > > > checking for pow... no > > > checking for regcomp... yes > > > checking for select... yes > > > checking for socket... yes > > > checking for sqrt... no > > > checking for strchr... yes > > > checking for strerror... yes > > > checking for strrchr... yes > > > checking for strstr... yes > > > checking for strtol... yes > > > checking for msgfmt... yes > > > configure: creating ./config.status > > > config.status: creating Makefile > > > config.status: creating asio/Makefile > > > config.status: creating man/Makefile > > > config.status: creating portmidi/Makefile > > > config.status: creating tcl/Makefile > > > config.status: creating po/Makefile > > > config.status: creating src/Makefile > > > config.status: creating extra/Makefile > > > config.status: creating extra/bonk~/GNUmakefile > > > config.status: creating extra/choice/GNUmakefile > > > config.status: creating extra/expr~/GNUmakefile > > > config.status: creating extra/fiddle~/GNUmakefile > > > config.status: creating extra/loop~/GNUmakefile > > > config.status: creating extra/lrshift~/GNUmakefile > > > config.status: creating extra/pd~/GNUmakefile > > > config.status: creating extra/pique/GNUmakefile > > > config.status: creating extra/sigmund~/GNUmakefile > > > config.status: creating extra/stdout/GNUmakefile > > > config.status: creating pd.pc > > > config.status: executing depfiles commands > > > config.status: executing libtool commands > > > === configuring in portaudio (/root/pure-data/portaudio) > > > configure: running /bin/bash ./configure --disable-option-checking > > > '--prefix=/usr/local' --cache-file=/dev/null --srcdir=. > > > checking for a thread-safe mkdir -p... /bin/mkdir -p > > > checking build system type... armv6l-unknown-linux-gnueabihf > > > checking host system type... armv6l-unknown-linux-gnueabihf > > > checking target system type... armv6l-unknown-linux-gnueabihf > > > checking for gcc... gcc > > > checking whether the C compiler works... yes > > > checking for C compiler default output file name... a.out > > > checking for suffix of executables... > > > checking whether we are cross compiling... no > > > checking for suffix of object files... o > > > checking whether we are using the GNU C compiler... yes > > > checking whether gcc accepts -g... yes > > > checking for gcc option to accept ISO C89... none needed > > > checking how to print strings... printf > > > checking for a sed that does not truncate output... /bin/sed > > > checking for grep that handles long lines and -e... /bin/grep > > > checking for egrep... /bin/grep -E > > > checking for fgrep... /bin/grep -F > > > checking for ld used by gcc... /usr/bin/ld > > > checking if the linker (/usr/bin/ld) is GNU ld... yes > > > checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B > > > checking the name lister (/usr/bin/nm -B) interface... BSD nm > > > checking whether ln -s works... yes > > > checking the maximum length of command line arguments... 1572864 > > > checking whether the shell understands some XSI constructs... yes > > > checking whether the shell understands "+="... yes > > > checking how to convert armv6l-unknown-linux-gnueabihf file names to > > > armv6l-unknown-linux-gnueabihf format... func_convert_file_noop > > > checking how to convert armv6l-unknown-linux-gnueabihf file names to > > > toolchain format... func_convert_file_noop > > > checking for /usr/bin/ld option to reload object files... -r > > > checking for objdump... objdump > > > checking how to recognize dependent libraries... pass_all > > > checking for dlltool... dlltool > > > checking how to associate runtime and link libraries... printf %s\n > > > checking for ar... ar > > > checking for archiver @FILE support... @ > > > checking for strip... strip > > > checking for ranlib... ranlib > > > checking for gawk... no > > > checking for mawk... mawk > > > checking command to parse /usr/bin/nm -B output from gcc object... ok > > > checking for sysroot... no > > > checking for mt... mt > > > checking if mt is a manifest tool... no > > > checking how to run the C preprocessor... gcc -E > > > checking for ANSI C header files... yes > > > checking for sys/types.h... yes > > > checking for sys/stat.h... yes > > > checking for stdlib.h... yes > > > checking for string.h... yes > > > checking for memory.h... yes > > > checking for strings.h... yes > > > checking for inttypes.h... yes > > > checking for stdint.h... yes > > > checking for unistd.h... yes > > > checking for dlfcn.h... yes > > > checking for objdir... .libs > > > checking if gcc supports -fno-rtti -fno-exceptions... no > > > checking for gcc option to produce PIC... -fPIC -DPIC > > > checking if gcc PIC flag -fPIC -DPIC works... yes > > > checking if gcc static flag -static works... yes > > > checking if gcc supports -c -o file.o... yes > > > checking if gcc supports -c -o file.o... (cached) yes > > > checking whether the gcc linker (/usr/bin/ld) supports shared > > libraries... > > > yes > > > checking whether -lc should be explicitly linked in... no > > > checking dynamic linker characteristics... GNU/Linux ld.so > > > checking how to hardcode library paths into programs... immediate > > > checking whether stripping libraries is possible... yes > > > checking if libtool supports shared libraries... yes > > > checking whether to build shared libraries... yes > > > checking whether to build static libraries... yes > > > checking for a BSD-compatible install... /usr/bin/install -c > > > checking whether ln -s works... yes > > > checking for ar... /usr/bin/ar > > > checking whether byte ordering is bigendian... no > > > checking for snd_pcm_open in -lasound... yes > > > checking for HPI_SubSysCreate in -lhpi... no > > > checking sys/soundcard.h usability... yes > > > checking sys/soundcard.h presence... yes > > > checking for sys/soundcard.h... yes > > > checking linux/soundcard.h usability... yes > > > checking linux/soundcard.h presence... yes > > > checking for linux/soundcard.h... yes > > > checking machine/soundcard.h usability... no > > > checking machine/soundcard.h presence... no > > > checking for machine/soundcard.h... no > > > checking for _oss_ioctl in -lossaudio... no > > > checking for pkg-config... /usr/bin/pkg-config > > > checking pkg-config is at least version 0.9.0... yes > > > checking for JACK... no > > > checking size of short... 2 > > > checking size of int... 4 > > > checking size of long... 4 > > > checking for clock_gettime in -lrt... yes > > > checking for clock_gettime... yes > > > checking for nanosleep... yes > > > checking for pthread_create in -lpthread... yes > > > configure: creating ./config.status > > > config.status: creating Makefile > > > config.status: executing libtool commands > > > > > > Configuration summary: > > > > > > Target ...................... armv6l-unknown-linux-gnueabihf > > > C++ bindings ................ no > > > Debug output ................ no > > > > > > ALSA ........................ yes > > > ASIHPI ...................... no > > > > > > OSS ......................... yes > > > JACK ........................ no > > > > > > root@BitChime:~/pure-data# make > > > make -C po all > > > make[1]: Entering directory `/root/pure-data/po' > > > make[1]: Nothing to be done for `all'. > > > make[1]: Leaving directory `/root/pure-data/po' > > > make all-recursive > > > make[1]: Entering directory `/root/pure-data' > > > Making all in portaudio > > > make[2]: Entering directory `/root/pure-data/portaudio' > > > if test -n "" ; then for dir in ""; do make -C $dir all; done ; fi > > > make[2]: Leaving directory `/root/pure-data/portaudio' > > > Making all in src > > > make[2]: Entering directory `/root/pure-data/src' > > > /bin/bash ../libtool --tag=CC --mode=link gcc -DPD > > > -DINSTALL_PREFIX=\"/usr/local\" -DUSEAPI_ALSA -DUSEAPI_OSS > > > -DUSEAPI_PORTAUDIO -I../portaudio/include -O6 -funroll-loops > > > -fomit-frame-pointer -export-dynac -lm -o pd pd-g_canvas.o pd-g_graph.o > > > pd-g_text.o pd-g_rtext.o pd-g_array.o pd-g_template.o pd-g_io.o > > > pd-g_scalar.o pd-g_traversal.o pd-g_guiconnect.o pd-g_readwrite.o > > > pd-g_editor.o pd-g_all_guis.o pd-g_bang.o -g_hdial.o pd-g_hslider.o > > > pd-g_mycanvas.o pd-g_numbox.o pd-g_toggle.o pd-g_vdial.o pd-g_vslider.o > > > pd-g_vumeter.o pd-m_pd.o pd-m_class.o pd-m_obj.o pd-m_atom.o > > pd-m_memory.o > > > pd-m_binbuf.o pd-m_conf.o pd-m_glob.o pm_sched.o pd-s_main.o pd-s_inter.o > > > pd-s_file.o pd-s_print.o pd-s_loader.o pd-s_path.o pd-s_entry.o > > > pd-s_audio.o pd-s_midi.o pd-s_utf8.o pd-d_ugen.o pd-d_ctl.o > > > pd-d_arithmetic.o pd-d_osc.o pd-d_filter.o pd-d_dac.od-d_misc.o > > pd-d_math.o > > > pd-d_fft.o pd-d_array.o pd-d_global.o pd-d_delay.o pd-d_resample.o > > > pd-x_arithmetic.o pd-x_connective.o pd-x_interface.o pd-x_midi.o > > > pd-x_misc.o pd-x_time.o pd-x_acoustics.o pd-x_net.o pd-x_ist.o pd-x_gui.o > > > pd-x_list.o pd-d_soundfile.o pd-s_audio_alsa.o pd-s_audio_alsamm.o > > > pd-s_midi_alsa.o pd-d_fft_mayer.o pd-d_fftroutine.o pd-s_audio_oss.o > > > pd-s_midi_oss.o pd-s_audio_pa.o pd-s_audio_paring.o -sound > > > ../portaudio/lib/libportaudio.la -lpthread -ldl > > > libtool: link: gcc -DPD -DINSTALL_PREFIX=\"/usr/local\" -DUSEAPI_ALSA > > > -DUSEAPI_OSS -DUSEAPI_PORTAUDIO -I../portaudio/include -O6 -funroll-loops > > > -fomit-frame-pointer -o .libs/pd pd-g_canvas.o pd-g_graph.o pd-g_texo > > > pd-g_rtext.o pd-g_array.o pd-g_template.o pd-g_io.o pd-g_scalar.o > > > pd-g_traversal.o pd-g_guiconnect.o pd-g_readwrite.o pd-g_editor.o > > > pd-g_all_guis.o pd-g_bang.o pd-g_hdial.o pd-g_hslider.o pd-g_mycanvas.o > > > pd-g_nbox.o pd-g_toggle.o pd-g_vdial.o pd-g_vslider.o pd-g_vumeter.o > > > pd-m_pd.o pd-m_class.o pd-m_obj.o pd-m_atom.o pd-m_memory.o pd-m_binbuf.o > > > pd-m_conf.o pd-m_glob.o pd-m_sched.o pd-s_main.o pd-s_inter.o pd-s_file.o > > > ps_print.o pd-s_loader.o pd-s_path.o pd-s_entry.o pd-s_audio.o > > pd-s_midi.o > > > pd-s_utf8.o pd-d_ugen.o pd-d_ctl.o pd-d_arithmetic.o pd-d_osc.o > > > pd-d_filter.o pd-d_dac.o pd-d_misc.o pd-d_math.o pd-d_fft.o pd-d_array.o > > > pd_global.o pd-d_delay.o pd-d_resample.o pd-x_arithmetic.o > > > pd-x_connective.o pd-x_interface.o pd-x_midi.o pd-x_misc.o pd-x_time.o > > > pd-x_acoustics.o pd-x_net.o pd-x_qlist.o pd-x_gui.o pd-x_list.o > > > pd-d_soundfile.o pd_audio_alsa.o pd-s_audio_alsamm.o pd-s_midi_alsa.o > > > pd-d_fft_mayer.o pd-d_fftroutine.o pd-s_audio_oss.o pd-s_midi_oss.o > > > pd-s_audio_pa.o pd-s_audio_paring.o -Wl,--export-dynamic -lm -lasound > > > ../portaudio/lib/.libsibportaudio.so -lpthread -ldl > > > pd-g_canvas.o: In function `pd_checkglist': > > > g_canvas.c:(.text+0x511c): undefined reference to `array_define_class' > > > pd-g_text.o: In function `text_save': > > > g_text.c:(.text+0x3074): undefined reference to `canvas_istable' > > > pd-m_conf.o: In function `conf_init': > > > m_conf.c:(.text+0x60): undefined reference to `x_array_setup' > > > collect2: ld returned 1 exit status > > > make[2]: *** [pd] Error 1 > > > make[2]: Leaving directory `/root/pure-data/src' > > > make[1]: *** [all-recursive] Error 1 > > > make[1]: Leaving directory `/root/pure-data' > > > make: *** [all] Error 2 > > > root@BitChime:~/pure-data# ^C > > > root@BitChime:~/pure-data# make > > > > > > This is about the fifth time I've tried to build Pd from source on the Pi > > > and is farther than I've got before - but not quite far enough. > > > > > > > > > Any thoughts anyone? > > > > > > Regards, > > > > > > Julian > > > > > _______________________________________________ > > > Pd-list@iem.at mailing list > > > UNSUBSCRIBE and account-management -> > > http://lists.puredata.info/listinfo/pd-list > > > > _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list