Hi i have made some advances.
I installed Debian Wheezy onto the Raspi I programmed the arduino to excpet the potentiometers and all 6 react from 0-1023 They are both responding I found the same bug where pd -nogui needs about 1/2 second to "boot" before turning on the dsp I also had to change the WProgram.h to Arduino.h in the Simple Messages System library which works well when placed in Arduino/Libraries. Now i am looking for a nice pd patch that can granulate sound without the need for a table to be written first. I am looking at Bill Orcutt's Grain2.0 port.? in conjunction with the Arduino2pd patch. more soon. if anyone has any suggestions for a fun effects patch please link or attach one! pp Patrick Pagano B.S, M.F.A Audio and Projection Design Faculty Digital Worlds Institute University of Florida, USA (352)294-2020 ________________________________ From: Pd-list <pd-list-boun...@mail.iem.at> on behalf of tim vets <timv...@gmail.com> Sent: Friday, April 17, 2015 6:06 PM To: Tilo Kremer Cc: pd-l...@iem.at Subject: Re: [PD] pd in a eurorack modular system 2015-04-15 0:57 GMT+02:00 Tilo Kremer <p...@dadacafe.org<mailto:p...@dadacafe.org>>: Hello, >> On Mon, Apr 13, 2015 at 8:01 PM, Peter P. >> <peterpar...@fastmail.com<mailto:peterpar...@fastmail.com>> wrote: * Pagano, >> Patrick >> <p...@digitalworlds.ufl.edu<mailto:p...@digitalworlds.ufl.edu>> [2015-04-13 >> 19:53]: >>> Hi >>> >>> >>> I am building my first modualr system with a little grant >>> money i got for research. For the first 1000$ i got a >>> beginner Pittsburgh Modular system and one envelope module. >>> FOr the second 1000$ to complete the grant i am considering you might be interested in the axoloti project: <http://axoloti.be/> while the board is not exactly in euro form factor it should be possible to include it into a modular setup (i am going to try exactly that as soon as i get a board) The board design allows the midi part to be cut off in order to fit vertical mounting in Eurorack. Mounting holes and solder holes are also provided to connect and mount the midi part after separation. For Eurorack connectivity, voltage levels for control voltage in- and output must still be shifted from 0..3.3V to 10V externally and thus will require some DIY work. from https://www.indiegogo.com/projects/axoloti-a-digital-audio-platform-for-makers#comments gr, Tim hth, tee _______________________________________________ Pd-list@lists.iem.at<mailto:Pd-list@lists.iem.at> mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
