This is likely due to binary incompatibility. Please try with pd-l2ork. -- Ivica Ico Bukvic, D.M.A. Associate Professor Computer Music ICAT Senior Fellow Director -- DISIS, L2Ork Virginia Tech School of Performing Arts – 0141 Blacksburg, VA 24061 (540) 231-6139 i...@vt.edu www.performingarts.vt.edu disis.icat.vt.edu l2ork.icat.vt.edu ico.bukvic.net On Jan 29, 2016 2:56 PM, "Samuel Burt" <composer.samuel.b...@gmail.com> wrote:
> Ivica, > > I'm trying it out now. I had previously tried installing pd-fftease 2.5.2 > through deken. I grabbed the lyon/ folder out of Pd-l2ork and dropped it > into ~/pd-externals. Pd was using the deken version (2.5.2), instead. So, I > removed fftease from /usr/local/lib/pd-externals and copied the lyon/ > folder there. I then created [pvoc~], but when I turn on audio with a > [pvoc~] object, Pd crashes with a segmentation fault. [granola~] (the > granular pitch-shifter) works so I am assuming some of the other fftease > objects work, but [pvoc~] gave me a hard crash every time. > > I'll keep hacking away at it. If anyone else discovers a solution, let me > know. I could also reformat the patch to use the 2.5.2 [pvoc~] although > then I can't program the patch on my Mac and then transfer it straight. I'd > have to heavily modify it every time. > > Thanks for the recommendation to use pd-l2ork's libraries. > > Sam > > > > On Wed, Jan 27, 2016 at 6:16 PM Ivica Bukvic <i...@vt.edu> wrote: > >> Pd-l2ork is not binary compatible with vanilla, although non-gui objects >> compiled for pd-l2ork will likely work ok. >> >> -- >> Ivica Ico Bukvic, D.M.A. >> Associate Professor >> Computer Music >> ICAT Senior Fellow >> Director -- DISIS, L2Ork >> Virginia Tech >> School of Performing Arts – 0141 >> Blacksburg, VA 24061 >> (540) 231-6139 >> i...@vt.edu >> www.performingarts.vt.edu >> disis.icat.vt.edu >> l2ork.icat.vt.edu >> ico.bukvic.net >> On Jan 27, 2016 5:42 PM, "Samuel Burt" <composer.samuel.b...@gmail.com> >> wrote: >> >>> Thanks, Ivica. >>> >>> I assume I can just yank all the precompiled plug-ins out of the >>> extra/lyon/ folder. There shouldn't be any problem with that as long as I >>> point my path to the right place? >>> >>> Sam >>> >>> >>> >>> On Wed, Jan 27, 2016 at 5:29 PM Ivica Bukvic <i...@vt.edu> wrote: >>> >>>> Pd-l2ork for RPi comes prepackaged with it. >>>> >>>> -- >>>> Ivica Ico Bukvic, D.M.A. >>>> Associate Professor >>>> Computer Music >>>> ICAT Senior Fellow >>>> Director -- DISIS, L2Ork >>>> Virginia Tech >>>> School of Performing Arts – 0141 >>>> Blacksburg, VA 24061 >>>> (540) 231-6139 >>>> i...@vt.edu >>>> www.performingarts.vt.edu >>>> disis.icat.vt.edu >>>> l2ork.icat.vt.edu >>>> ico.bukvic.net >>>> On Jan 27, 2016 5:20 PM, "Samuel Burt" <composer.samuel.b...@gmail.com> >>>> wrote: >>>> >>>>> Eric, >>>>> >>>>> I've been so excited by the results I got after fine tuning my patch >>>>> with [pvoc~]. [pvoc~] runs so efficiently. I never quite got [mindwarp~] >>>>> functioning without major audio problems that I didn't have with a >>>>> previous >>>>> version, though. It wasn't a big deal, because the audio routine I've >>>>> created sounds find without it. >>>>> >>>>> Now, that I've got fftease 3.0 running smoothly, I discovered I can't >>>>> run it on my Raspberry Pi. Would it be possible for me to compile it on >>>>> Linux? or is 3.0 tuned just for the Mac, these days? Do I need to redo my >>>>> code to use fftease 2.5? >>>>> >>>>> Thanks for the help. >>>>> >>>>> On Tue, Jan 26, 2016 at 1:03 PM Samuel Burt < >>>>> composer.samuel.b...@gmail.com> wrote: >>>>> >>>>>> It's working well, now. I think there were also some compatibility >>>>>> issues with the way the objects used to work and the way they work now. I >>>>>> was also getting crashes, but limited the warp factor input to mindwarp~ >>>>>> to >>>>>> be 1/16 to 16. I must have been sending really bad numbers. >>>>>> >>>>>> I didn't make clean at the end and I should check my path to make >>>>>> sure both folders are included. Other libraries I've noticed use only one >>>>>> folder. Any particular reason to keep them separate? >>>>>> >>>>>> Sam >>>>>> >>>>>> >>>>>>>> >>>>>>>> >>>>> _______________________________________________ >>>>> Pd-list@lists.iem.at mailing list >>>>> UNSUBSCRIBE and account-management -> >>>>> http://lists.puredata.info/listinfo/pd-list >>>>> >>>>>
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list