The specs don't say much about how to interpret the value actually https://www.midi.org/specifications/item/table-1-summary-of-midi-message
"Pitch Bend Change. status: 1110nnnn data: 0lllllll 0mmmmmmm This message is sent to indicate a change in the pitch bender (wheel or lever, typically). The pitch bender is measured by a fourteen bit value. Center (no pitch change) is 2000H. Sensitivity is a function of the transmitter. (llllll) are the least significant 7 bits. (mmmmmm) are the most significant 7 bits." >________________________________ > From: Alexandre Torres Porres <por...@gmail.com> >To: Giulio Moro <giuliom...@yahoo.it> >Cc: "pd-list@lists.iem.at" <pd-list@lists.iem.at> >Sent: Sunday, 4 September 2016, 19:33 >Subject: Re: [PD] bendin bug (?) > > > > > > > >2016-09-04 13:35 GMT-03:00 Giulio Moro <giuliom...@yahoo.it>: > >Is this a [bendin] or a [bendout] bug? >> >> >>[bendin]'s current implementation is closer to the actual MIDI messages being >>transmitted. > > >but in actuality, the not raw standard is from -8192 to 8191 right? > > >I just care they both are the same, but it seems to me that -8192 to 8191 is >the sensible choice > > >cheers > > _______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
