Hi!
Yes, I did the -bytes 4 flag, too. Interesting thing is that when I save the
file to disk, I get this notification on terminal window: zx.wav: biggest
amplitude = 0.967515 which is the same as original. But loading the same file
into another table gives completely different results. I think (at least on my
system) that [soundfiler] has issues with -skip flag. If I completely remove
that flag, results are ok.
Cheers!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Lucas Cordiviola <lucard...@hotmail.com>
To: Hrvoje Radnic <hrvojerad...@yahoo.com>
Cc: "pd-list@lists.iem.at" <pd-list@lists.iem.at>
Sent: Wednesday, August 2, 2017 12:58 PM
Subject: Re: [PD] Writing part of large table to file
Are you sure you did step 3 (with -byte 4 flag) & then reload the written file
(step 4).?
Mensaje telepatico asistido por maquinas.On 8/2/2017 7:38 AM, Hrvoje Radnic
wrote:
I tried your method with -bytes 4 flag, but the results are the same for me. I
think I a stuck with [soundfiler] object. Maybe I will look for alternative
option like recording the audio with [writesf~] or trying to save the contents
of a table as a list (txt).
Thank you once again for helping me!Cheers!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Lucas Cordiviola <lucard...@hotmail.com>
To: Hrvoje Radnic <hrvojerad...@yahoo.com>
Cc: "pd-list@lists.iem.at" <pd-list@lists.iem.at>
Sent: Wednesday, August 2, 2017 12:17 PM
Subject: Re: [PD] Writing part of large table to file
This is because the soundfile is written @ 16 bits (bit depth).Use the flag
"-bytes 4" for the message to write the file. This is "4 byte floating point"
or 32bit floating point, same as the original "laboratory" array. (you don't
need to do this if the first array was filled with a normal sound file).
You will see that the numbers match in your example.
Salutti,
Lucarda.
Mensaje telepatico asistido por maquinas.On 8/2/2017 6:33 AM, Hrvoje Radnic
wrote:
Hi!
It doesn't work well for me. What I discovered with your patch is that
soundfiler can't skip too far. For example, if I send it a message with 2M skip
flag and 1999999 nframes flag, the ramp does not climb up to the top. You can
compare the values with [tabread] objects (see the attached patch). Will you
please, check that on your system?Thank you very much for your time!Cheers!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Lucas Cordiviola <lucard...@hotmail.com>
To: "hrvojerad...@yahoo.com" <hrvojerad...@yahoo.com>
Cc: "pd-list@lists.iem.at" <pd-list@lists.iem.at>
Sent: Wednesday, August 2, 2017 12:52 AM
Subject: Re: [PD] Writing part of large table to file
Use this graphical patch, "array-sound.pd" attached .it looks like this:
Will help to describe the issue.
Hope it helps.
Mensaje telepatico asistido por maquinas.
On 8/1/2017 2:52 PM, hrvojerad...@yahoo.com wrote:
What I hear is not the part I wanted to save ie I need the part from the end of
a table, getting the part from the beginning instead. And it is shorter. I
can't find the pattern in that offset, so can't describe the bug precisely.
Poslano s mojeg iPhonea
01.08.2017., u 13:24, Lucas Cordiviola <lucard...@hotmail.com> napisao:
I'm on win8.1Do you clear the array when loading files that are smaller than
the one you loaded previously?Can you describe what is that you are hearing
that makes you feel there's a bug?
Mensaje telepatico asistido por maquinas.On 8/1/2017 8:13 AM, Hrvoje Radnic
wrote:
Yes, the playback part [readsf~] is bad, but that was not an issue. I made a
mistake with pasting the part from my patch.
Regarding the soundfiler, I still have no clue what is wrong with my patch.
Maybe the problem is OS specific? I can't test it on my Win machine right now.
What's your OS? I am on ubuntu sudio.
Cheers!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Lucas Cordiviola <lucard...@hotmail.com>
To: Hrvoje Radnic <hrvojerad...@yahoo.com>; "pd-list@lists.iem.at"
<pd-list@lists.iem.at>
Sent: Tuesday, August 1, 2017 12:21 PM
Subject: Re: [PD] Writing part of large table to file
I've corrected the [readsf~] but the rest is OK.Didn't have troubles with
-nframes > 1.8M. Works Ok with 2.5M.The only limitation that I know for integer
numbers (on Pd's control level) is that you can't exceed the 16777216 number.
See attached.Salutti,
Lucarda.
Mensaje telepatico asistido por maquinas.On 8/1/2017 6:10 AM, Hrvoje Radnic
wrote:
Sure, it is in the attachment.Thank you for your time!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Lucas Cordiviola<lucard...@hotmail.com>
To: "pd-list@lists.iem.at" <pd-list@lists.iem.at>
Sent: Tuesday, August 1, 2017 12:09 AM
Subject: Re: [PD] Writing part of large table to file
Can you attach a patch that demonstrate the issue?Do not attach the sound-file,
we fill your specified n of samples.Salutti,
Lucarda.
Mensaje telepatico asistido por maquinas.On 7/31/2017 6:31 AM, Hrvoje Radnic
via Pd-list wrote:
Ok, I got some success with soundfiler, but, found out that I can write a file
only if the last sample of the file is smaller than 1 800 000 approximately
(-nframes flag). Anyone had similar experience? Is it a bug?Thanks!
Hrvoje Radnic
http://soundcloud.com/sumovi-protiv-valova
00385(0)915225162
From: Jack<j...@rybn.org>
To: pd-list@lists.iem.at
Sent: Monday, July 31, 2017 10:13 AM
Subject: Re: [PD] Writing part of large table to file
Hello,
Did you see the help file about [soundfiler] to save a table in binary
sound file ?
It is easy to copy/paste a part of table with objects [array].
++
Jack
Le 30/07/2017 à 12:14, Hrvoje Radnic via Pd-list a écrit :
> Dear List!
>
> I would like to save a part of very large table into the audio file.
> Let's say, I have a 10 million points sized table and want to save a
> file to disk which contains the part of that table, ranging from 2M to
> 3M point. I know how to do it by recording the audio in real time, but
> would like to do it "instantly".
>
> Thank you for your suggestions!
>
> Hrvoje Radnic
_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management ->
https://lists.puredata.info/listinfo/pd-list
