Hi, the audioinjector octo card is actually 6 in / 8 out. It works nicely with new kernels (4.9+). It should work with the rpi 0 since the GPIO pinout is identical to rpi 2/3. Its width is like rpi 2/3, but it can still sit on the smaller rpi 0 board. best, Thomas
-- Thomas Grill http://grrrr.org > Am 02.09.2017 um 20:15 schrieb Christof Ressi <christof.re...@gmx.at>: > > wow, this sounds great! must try it out somehow. > > > Gesendet: Samstag, 02. September 2017 um 20:10 Uhr > Von: "Peter van Haaften" <pete...@gmail.com> > An: "Christof Ressi" <christof.re...@gmx.at> > Cc: Pd-List <pd-list@lists.iem.at> > Betreff: Re: [PD] pd on pi zero ? > > There is a GPIO pi zero soundcard to be released soon by an Australian > company called Audio Injector: > > http://www.audioinjector.net/rpi-shop > > I have used their stereo card on my PI2 & 3 with great results. . . very low > latency (below 4ms!). > > Also they have a 16 channel card (8in/8out) which is very tempting. > > Peter > > On Fri, Sep 1, 2017 at 2:37 PM, Christof Ressi > <christof.re...@gmx.at[mailto:christof.re...@gmx.at]> wrote:I can also > recommend this very cheap thing here (around 8€): > > http://www.manhattan-products.com/hi-speed-usb-3-d-sound-adapter[http://www.manhattan-products.com/hi-speed-usb-3-d-sound-adapter] > https://www.neuhold-elektronik.at/catshop/product_info.php?products_id=4925 > > (I think both are more or less the same). > > the latency is quite bad but basically the same as the Behringer UCA202. I > used it several interactive installations with the Raspberry Pi 3 where I > didn't need ultra low latencies and it worked well. > > Christof > > > > > > > > > Gesendet: Freitag, 01. September 2017 um 19:38 Uhr > Von: "Daniel Iglesia" > <daniel.igle...@gmail.com[mailto:daniel.igle...@gmail.com]> > An: "Theron Trowbridge" > <theron.trowbri...@gmail.com[mailto:theron.trowbri...@gmail.com]> > Cc: "pd-list@lists.iem.at[mailto:pd-list@lists.iem.at]"; > <pd-list@lists.iem.at[mailto:pd-list@lists.iem.at]>, "Thomas Grill" > <g...@grrrr.org[mailto:g...@grrrr.org]> > Betreff: Re: [PD] pd on pi zero ? > > I got smooth audio stereo output (didn't test input) with a Behringer > U-Control UCA202 and a pi-zero. > I just tried a simple sine wave, I didn't push it to see what happens under > load...but now I'm curious to revisit it and see... > > On Fri, Sep 1, 2017 at 10:16 AM, Theron Trowbridge > <theron.trowbri...@gmail.com[mailto:theron.trowbri...@gmail.com][mailto:theron.trowbri...@gmail.com[mailto:theron.trowbri...@gmail.com]]> > wrote: > I would think Pd should work on a zero, though I haven't tried it myself. > > Miller has some sound card recommendations on the Pd documentation > http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0[http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0][http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0[http://msp.ucsd.edu/Pd_documentation/x3.htm#s1.0]] > in the section "Audio hardware in Linux". > > I have had good luck with the Griffin Technology iMic with the non-zero > Raspberry Pi models - > amazon.com/gp/product/B003Y5D776[http://amazon.com/gp/product/B003Y5D776][http://amazon.com/gp/product/B003Y5D776[http://amazon.com/gp/product/B003Y5D776]], > and I think it's based on one of the chipsets that Miller found worked well. > > > -Theron > ^ > > > > On Fri, Sep 1, 2017 at 3:51 AM, Thomas Grill > <g...@grrrr.org[mailto:g...@grrrr.org][mailto:g...@grrrr.org[mailto:g...@grrrr.org]]> > wrote:Hi Jaime, > i have successfully used the PhatDAC and other I2S based dacs. Output-only > though! > Will report later on trying the audioinjector octo card which is input/output. > best, Thomas > >> Am 31.08.2017 um 04:37 schrieb Jaime Oliver >> <jaime.oliv...@gmail.com[mailto:jaime.oliv...@gmail.com][mailto:jaime.oliv...@gmail.com[mailto:jaime.oliv...@gmail.com]]>: >> >> Hello everyone! >> >> Has anyone tried to use pd on a pi zero and if so, which audio interface did >> you use? >> >> J> _______________________________________________ >> Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto:Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] >> mailing list >> UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]] > > > _______________________________________________ > Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto:Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] > mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]] > > _______________________________________________ > Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto:Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] > mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]] > _______________________________________________ > Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at] mailing list UNSUBSCRIBE > and account-management -> > https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list]] > > _______________________________________________ > Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at] mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list] > > _______________________________________________ > Pd-list@lists.iem.at mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
