Whats 'the pylon software' ? How does it control the camera without a /dev/video?
pix_video requires normal video interfaces On Sun, Aug 5, 2018 at 3:35 PM, Csaba Láng <langcs...@gmail.com> wrote: > no /dev/video at all. If I connect a usb2 webcam, that works, /dev/video0 > appears. > user has access to the camera as the pylon software from the producer can > see it immediately, could change the parameters such as the device name or > resolution. But I need it in pd :) > > On Sun, Aug 5, 2018 at 3:26 PM Bastiaan van den Berg <b...@spacedout.nl> > wrote: > >> 1) do you see /dev/video* when you plug it in >> 2) does your user have access to that >> >> just like any other camera? >> >> On Sun, Aug 5, 2018 at 2:59 PM, Csaba Láng <langcs...@gmail.com> wrote: >> >>> Dear list, >>> >>> I use special 227fps usb cameras. >>> lsusb shows the id and the bus. >>> Bus 006 Device 002: ID 2676:ba02 Basler AG ace >>> How can I find the path to it and use with pix_video? >>> Test software shows device input. >>> device0-7 can not find it as /dev/video* does not exist. >>> Best, >>> >>> Popesz >>> >>> _______________________________________________ >>> Pd-list@lists.iem.at mailing list >>> UNSUBSCRIBE and account-management -> https://lists.puredata.info/ >>> listinfo/pd-list >>> >>> >> _______________________________________________ >> Pd-list@lists.iem.at mailing list >> UNSUBSCRIBE and account-management -> https://lists.puredata.info/ >> listinfo/pd-list >> > > _______________________________________________ > Pd-list@lists.iem.at mailing list > UNSUBSCRIBE and account-management -> https://lists.puredata.info/ > listinfo/pd-list > >
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list