Gemwin has been solved after a restart of the computer. Sure I tried to unplug the cameras, but then pd crashes and switches off. The disconnect solution would be a big help, as creating a complex patch with frequent computer restart is a pain in the a***s.
Let me know how I could help you, looks like after the weekend I have to give back the cameras for a while. On Wed, Aug 29, 2018 at 9:49 PM IOhannes m zmölnig <zmoel...@iem.at> wrote: > On 8/29/18 6:25 PM, Csaba Láng wrote: > > Looks like for me that pix_video does not disconnect the cameras, that is > > why I cannot get image back after changing device. > > After turning off puredata, if not frozen and killall it, the pylon > viewer > > cannot get image from the cameras, 0 frames and an error message. > > > > Probably I will not need it to jump from device to device, but makes life > > easier if does not have to restart the computer after each new test. > > sure. > however, this is hard to debug without a device at hand. > it might be related to https://github.com/umlaeute/Gem/issues/192 (again > check the terminal for error messages) > > also: did you try to phyisically unplug the camera? > > gasdmr > IOhannes > > _______________________________________________ > Pd-list@lists.iem.at mailing list > UNSUBSCRIBE and account-management -> > https://lists.puredata.info/listinfo/pd-list >
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list