OK I just tried and mknob_newclick allows receiving hovering as you said before.
Antoine Rousseau http://www.metalu.net <http://metalu.net> __ http://www.metaluachahuter.com/ <http://www.metaluachahuter.com/compagnies/al1-ant1/> Le ven. 7 sept. 2018 à 19:32, Antoine Rousseau <anto...@metalu.net> a écrit : > I see; why not even showing outline and iolets as soon as the patch is > switched to edit mode? > But I must admit I don't know how to detect these events (object is > hovered /or/ patch switches to /from edit mode). I'll try to find existing > similar code, but maybe you have some pointers? > > Antoine Rousseau > http://www.metalu.net <http://metalu.net> __ > http://www.metaluachahuter.com/ > <http://www.metaluachahuter.com/compagnies/al1-ant1/> > > > > Le ven. 7 sept. 2018 à 19:20, Christof Ressi <christof.re...@gmx.at> a > écrit : > >> > you mean like the little square of the canvas object? >> >> kind of, except that my_canvas only shows the square when the object is >> selected. of course that's also possible! my idea was to show it when you >> hover the object in editmode, so you don't have to explicitly select the >> object to see where to make the connections. >> >> >> Gesendet: Freitag, 07. September 2018 um 18:43 Uhr >> Von: "Antoine Rousseau" <anto...@metalu.net> >> An: "Christof Ressi" <christof.re...@gmx.at> >> Cc: Pd-list <Pd-list@lists.iem.at> >> Betreff: Re: Re: [PD] Slider/Knob >> >> a visual hint (i.e. draw the rect borders and the iolets)- but only when >> the user hovers over the knob while the glist is in editmode >> >> you mean like the little square of the canvas object? yes, I like the >> idea. I'll try this soon, thanks! >> >> >> Antoine Rousseau >> http://www.metalu.net[http://metalu.net] __ >> http://www.metaluachahuter.com/[http://www.metaluachahuter.com/compagnies/al1-ant1/] >> >> >> Le ven. 7 sept. 2018 à 17:31, Christof Ressi <christof.re...@gmx.at >> [mailto:christof.re...@gmx.at]> a écrit :Hi, to be honest, I never found >> it to be a big problem. I'm not too sure about the three outlet solution, I >> think it's indeed a bit far-stretched :-) what I would suggest is to give >> the user a visual hint (i.e. draw the rect borders and the iolets)- but >> only when the user hovers over the knob while the glist is in editmode. you >> can do this in mknob_newclick. >> >> > iolets are floating in an empty space near the knob; >> >> yes, this looks a bit funny, but you usually won't have the cables >> visible in your final GUI anyway, so I wouldn't worry about that. >> >> Christof >> >> Gesendet: Freitag, 07. September 2018 um 14:45 Uhr >> Von: "Antoine Rousseau" <anto...@metalu.net[mailto:anto...@metalu.net]> >> An: "Christof Ressi" <christof.re...@gmx.at[mailto:christof.re...@gmx.at >> ]> >> Cc: Pd-list <Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]> >> Betreff: Re: [PD] Slider/Knob >> >> Thanks for recommending mknob ;-) >> >> I'd like to do an update of moonlib soon, as it has received some >> improvements: sfread2~ understands a new [index( message (thx to Antoine >> Villeret), and mknob now better supports zooming. >> >> >> About the latter, I'd like to hear your opinion (you all mknob users...) >> about the following problem (and the solution I propose): >> >> mknob poses a particular problem: because its circular shape doesn't >> comply to Pd graphical paradigm (every other objects are rectangular >> shaped), iolets are floating in an empty space near the knob; because it's >> visually ugly, and I don't want to surround the knob with a rectangular >> box, I chose not to draw the iolets, even when the mknob is not bounded to >> receive/send symbols. The problem (for explicitly connected knobs) is now >> that it's somewhat tricky to guess where you have to draw the connection >> to/from, and that the wire connects to/from nowhere. This is acceptable for >> small knob, but when it becomes bigger it's really weird. >> >> So the only idea I see (apart from hacking Pd sources...) is to setup 3 >> inlets and 3 outlets, so that you can connect from/to the one in the >> middle; the wire is then actually connected to the circle. I succeeded to >> code this behaviour, keeping to possibility to use any inlet and sending to >> the three outlets. It's maybe a little far-fetched, but its works. What do >> you think of it? >> >> >> >> Antoine Rousseau >> http://www.metalu.net[http://www.metalu.net][http://metalu.net[ >> http://metalu.net]] __ >> http://www.metaluachahuter.com/[http://www.metaluachahuter.com/compagnies/al1-ant1/][http://www.metaluachahuter.com/%5Bhttp://www.metaluachahuter.com/compagnies/al1-ant1/%5D] >> <http://www.metaluachahuter.com/%5Bhttp://www.metaluachahuter.com/compagnies/al1-ant1/%5D%5Bhttp://www.metaluachahuter.com/%5Bhttp://www.metaluachahuter.com/compagnies/al1-ant1/%5D%5D> >> >> >> Le ven. 7 sept. 2018 à 13:05, Christof Ressi <christof.re...@gmx.at >> [mailto:christof.re...@gmx.at][mailto:christof.re...@gmx.at[mailto: >> christof.re...@gmx.at]]> a écrit :I recommend mknob from moonlib, but >> make sure you get the latest version from deken for pd >= 0.47 >> >> Christof >> >> > Gesendet: Freitag, 07. September 2018 um 12:59 Uhr >> > Von: Clemens <reinkl...@online.de[mailto:reinkl...@online.de][mailto: >> reinkl...@online.de[mailto:reinkl...@online.de]]> >> > An: Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto: >> Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] >> > Betreff: [PD] Slider/Knob >> > >> > Hello List, >> > >> > I would like to use knobs instead of sliders, >> > >> > where can I find them? >> > >> > Cheers >> > >> > Clemens >> > >> > >> > >> > _______________________________________________ >> > Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto: >> Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] mailing list >> > UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D] >> <https://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D%5Bhttps://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D%5D> >> > >> >> >> _______________________________________________ >> Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at][mailto: >> Pd-list@lists.iem.at[mailto:Pd-list@lists.iem.at]] mailing list >> UNSUBSCRIBE and account-management -> >> https://lists.puredata.info/listinfo/pd-list[https://lists.puredata.info/listinfo/pd-list][https://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D] >> <https://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D%5Bhttps://lists.puredata.info/listinfo/pd-list%5Bhttps://lists.puredata.info/listinfo/pd-list%5D%5D> >> >> >>
_______________________________________________ Pd-list@lists.iem.at mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list