I was able to get the files by right-clicking on their icon and doing 'save as'.
In my experience the only way [comport] crashes Pd is when you try to
print its output to the console while it's receiving huge amounts of
data. This causes the messaging pipeline to the TCL process to fill up
until it has no more space, as it is unable to keep up with the
incoming stream..

Martin


On Sat, Apr 10, 2021 at 12:20 PM Alexandros <adr...@gmail.com> wrote:
>
> Pduino has nothing to do with [serial_print]. Such a scenario could suggest 
> some problem with Pd when sending data to [comport] and processing data 
> received from it (I'm not suggesting it's a problem with [comport] since 
> disconnecting it from [serial_print] solved the crash problem). I haven't 
> checked your files yet (see my previous reply asking for them via a different 
> medium), so I have no idea what could be wrong with [serial_print]. I'll get 
> back once I have your files and have checked them.
>
> On 10/4/21 11:26 π.μ., Nicklas Lundberg wrote:
>
> Thank you for doing this. It may also be relevant that I experienced the 
> exact same of freeze/crash behavior when using Pduino.
>
>> Date: Fri, 9 Apr 2021 17:14:18 +0300
>> From: Alexandros <adr...@gmail.com>
>> To: pd-list@lists.iem.at
>> ...
>> This has to do with the abstraction I made then. We did discuss about it
>> on Pd's forum, but it didn't occur to me that this could be the case.
>> I'll have a look at it and get back to you.
>>
>> On 9/4/21 5:10 ?.?., Nicklas Lundberg wrote:
>> > Hmm, it does not crash when [serial_print any] is disconnected. You
>> > can quit normally.
>> >
>> > This may be relevant:
>> >
>> > Pd console reports no errors when communication fails when trying too
>> > fast updates (with [serial_print any] disconnected less than 30 ms).
>> >
>> > I uploaded a similar setup (pd patch+arduino sketch) to the folder.
>> > Here it does not crash even if updates are sent every 1 ms. And the pd
>> > console starts to write error messages when the communication is too
>> > fast (starts around 7 ms).
>
>
> _______________________________________________
> Pd-list@lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> 
> https://lists.puredata.info/listinfo/pd-list
>
> _______________________________________________
> Pd-list@lists.iem.at mailing list
> UNSUBSCRIBE and account-management -> 
> https://lists.puredata.info/listinfo/pd-list



_______________________________________________
Pd-list@lists.iem.at mailing list
UNSUBSCRIBE and account-management -> 
https://lists.puredata.info/listinfo/pd-list

Reply via email to