----- Original Message ----- From: "Chris" <[EMAIL PROTECTED]> To: "Dr. Shaun Canning" <[EMAIL PROTECTED]> Sent: Sunday, March 14, 2004 12:08 PM Subject: Re: So called pixel problems
> Hi Shaun,This site is extremely helpful even though it is a Nikonians site > it is about the same sensor and I think you would find it of use.The other > test for spots is to set your aperture at f22,point it(the camera)at blue > (preferably)sky and take a seies of shots.This will show up any dust spots.I > went through much heart ache about bloody dust. > > http://www.pbase.com/copperhill/ccd_cleaning > > I would be interested to see how you fare. > > Regards Chris kennedy > > > > > > ----- Original > Message ----- > From: "Dr. Shaun Canning" <[EMAIL PROTECTED]> > To: "'Chris'" <[EMAIL PROTECTED]> > Sent: Sunday, March 14, 2004 1:33 AM > Subject: RE: So called pixel problems > > > > Yep, I'm going to give it a good clean Chris, just as soon as I figure out > how! > > > > Cheers > > > > Shaun > > > > Dr. Shaun Canning > > Cultural Heritage Services > > Lawrence Way, Karratha, > > Western Australia, 6714 > > Mob: 0414-967 644 > > > > [EMAIL PROTECTED] > > www.heritageservices.com.au > > > > > > > > -----Original Message----- > > From: Chris [mailto:[EMAIL PROTECTED] > > Sent: Saturday, 13 March 2004 9:22 PM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > Subject: So called pixel problems > > > > Hi Shaun,I would have thought you might just have a slightly soiled > > sensor looking at the flower shot and the others.If after printing the > shots > > you see the spots a light swab clean should do the trick.I have had dust > > problems with a new D100,*istD,a New Sigma SD10 and they have a dust > > filter.It is possible and quite common to get dust from the factory.I > would > > check out this avenue as it will more than likely occur especially in the > > bush if you don't take care when changing lenses.Zoom lenses can suckit in > > also. > > Regards Chris Kennedy > > > > > > > > > > > >
