Albano, I'm not familiar with that camera but FWIW, I get fabulous 8X10's from my Optio S (3.0MP) shot at the highest jpeg setting. I run it thru PS and print on an Epson Stylus Photo printer @ 300dpi. I suspect some of your problems might be the resolution you're printing at - 240 is the lowest I use and depending on the image itself it can produce an acceptable result.
Kenneth Waller ----- Original Message ----- From: "Albano Garcia" <[EMAIL PROTECTED]> Subject: How big can you print from 3MP? > > Hi gang, > I'm new to digital with a 3MP camera (Fuji S5000, > Pentax not available at all in Argentina, either film > or digital). > It's capable of shooting RAW and that's what I'm > doing. My problem comes when I do prints. I made > several 8x10 inch from 3MP files, taking care with > unsharp mask, and prints (Fuji Frontier, file at > 200dpi) show a sort of grainy look, noisy (pixels, I > know). Maybe I'm pushing the resolution? 200dpi is too > few? > I made 4x6 from 1MP jpg and they look gorgeous. Maybe > I'm better with 3 or 6MP jpgs, with the compression > eliminating the noise-grain? I think my photoshop > skills are next to advanced, but I'm still unable to > get satisfactory results from RAW files. > Any comments, suggestions, tips? > Thanks in advance. > > > > ===== > Albano Garcia > Photography & Graphic Design > http://www.albanogarcia.com.ar > > > > > > > > _______________________________ > Do you Yahoo!? > Declare Yourself - Register online to vote today! > http://vote.yahoo.com >