Dave -
Sometimes banding will occur when high speed printing is enabled. Disable high speed in the printer properties and see if that solves the problem
-P
David Savage wrote:
G'day PDML'ers
After a year of not being satisfied with my prints, I sat down last Sunday and read everything I could find on the subject of colour management. Long story short, success, I am now able to produce consistent, if not perfect, results.
But...
I've now got problems with blue lines running through all my prints:
http://tinyurl.com/9ub3b
I've run the head cleaning utility so many times I've used half an ink cartridge. The nozzle check pattern always comes out clear. The banding lessens if I make enough prints, but never really clears up.
I suspect the problem is caused by a clogged print head (please correct me if I'm wrong). I'm using an Epson Stylus Photo 935. As most no doubt know, unlike Canon & HP inkjet printers the print head isn't removable, so fixing the problem isn't all that simple.
So my question is. Who on the list has had similar problems? Were you able to clear it, and if so, how did you do it?
Thanks in advance.
Dave
