Adam Maas wrote:
Jon Paul Schelter wrote:
Does anyone out there own a Minolta Scan Dual II (or III or IV, for
that matter)?
I bought one a while back, to digitize my APS film.. worked great for
that.
I just got back from a diving trip, and we picked up a cheap 35mm
re-usable dive camera. I can't seem to get the scanner to load the
35mm tray. The scanning software keeps complaining about the film
strip holder not being in its proper place. How far do you push this
thing in? The manual describes a film holder that is slightly
different from the one I have.. min is side hinged, and is missing a
"load to here" mark.
(got the scanner off ebay, a couple years ago. was I given the wrong
film holder?)
Help!?
If it's the same as my Scan Dual III, make sure the scanner door is set
to the 35mm position (Full down is APS, there's a mild detent when it
hits the 35mm position) then feed the 35mm adaptor in until you
feel/hear a click, it's further than you think, it will then pull the
holder in the rest of the way.
-Adam
Thanks, I'll try again once it's done scanning the APS roll I threw in.
(found one more and thought I'd test the unit, just in case)
But.. That's basically what I did. Nothing happened, and I ended up
pushing the holder in as far as I could, without the scanner doing
anything. how far would you say you push it in? Past the first negative
window?
jp
--
--------------------------------------------------------------------
Jon Paul Schelter http://forksandhope.com/ [EMAIL PROTECTED]
"This isn't right, it isn't even wrong."