Thanks Paul for the offer. Godfrey's settings gave the results I was expecting, so I'm good for now.
I love the prints the R2400 produces. I haven't done much yet, but they are very nice. The B&W on Epson Enhanced Matte is very neutral, which is good, although I'll need to explore a bit to get the nice warmth that I liked so much in the Piezography prints. Anyway, thanks guys for your help. j On 10/27/06, Paul Stenquist <[EMAIL PROTECTED]> wrote: > I know from previous conversations with Godfrey that PSCS and PSCS2 > are different in terms of the way they handle printing. If these > instructions don't work for you, let me know, and I'll tell you how > I'm set up for PSCS with my 2200. It's quite a bit different, but it > works very well. > Paul > On Oct 27, 2006, at 7:02 PM, Godfrey DiGiorgi wrote: > > > You're on Mac OS X, right? I'm using v10.4.8. > > > > Once you've clicked the "print" button in the Photoshop "Print with > > Preview..." dialog, the next dialog is provided by the Epson R2400 > > print driver. You should see in the bottom menu a "Summary" item. > > Check in there for Print Settings ... it should tell you Version 2.53 > > for the latest version of the R2400 print driver: > > > > http://homepage.mac.com/godders/R2400-Summary.jpg > > > > Presuming that you have the same version I do, the same menu choose > > "Print Settings" should net this panel: > > > > http://homepage.mac.com/godders/R2400-PrintSettings.jpg > > > > And the same menu choose "Color Management" should net this panel: > > > > http://homepage.mac.com/godders/R2400-ColorMgmnt.jpg > > > > If you're not getting these configuration panels, you might be using > > an older version of the R2400 driver. Download and install the latest > > from the Epson website. > > > > Godfrey > > > > > > On Oct 27, 2006, at 2:58 PM, Juan Buhler wrote: > > > >> BTW, I'm usinf CS, not CS2. But this shouldn't have an effect on the > >> printer driver menues, right? > >> > >> j > >> > >> On 10/27/06, Juan Buhler <[EMAIL PROTECTED]> wrote: > >>> Godfrey, first, I wanted to thank you for your always helpful > >>> messages > >>> about printing. I'm using them as reference as I set myself up with > >>> the r2400. > >>> > >>> On 10/27/06, Godfrey DiGiorgi <[EMAIL PROTECTED]> wrote: > >>>> - Choose the Color Management panel > >>>> - Set color management to "OFF" > >>> > >>> I don't see any options to set color management to "off". In the > >>> Color > >>> Management panel of the printer driver, I get controls for color > >>> toning, tone, brightness, contrast, shadow and highlight tonalities, > >>> max optical density, and a toggle for "highlight point shift". > >>> There's > >>> no "off" anywhere, the best I can do is set everything to its > >>> defauls > >>> values. > >>> > >>> What am I missing? > > > > > > -- > > PDML Pentax-Discuss Mail List > > PDML@pdml.net > > http://pdml.net/mailman/listinfo/pdml_pdml.net > > > -- > PDML Pentax-Discuss Mail List > PDML@pdml.net > http://pdml.net/mailman/listinfo/pdml_pdml.net > -- Juan Buhler - http://www.jbuhler.com photoblog: http://photoblog.jbuhler.com a book: http://www.jbuhler.com/book.html -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net
