> 
> From: "Shel Belinkoff" <[EMAIL PROTECTED]>
> Date: 2006/11/03 Fri AM 05:39:50 GMT
> To: "Pentax-Discuss Mail List" <pdml@pdml.net>
> Subject: Re: Best way to clean those difficult Multicoatings?
> 
> I don't think I'd go so far as to call it a "scam." For me, it just wasn't
> my style, and the cleaning agents I mentioned do a great job, if you learn
> how to work with them properly.  ROR seems to require a more delicate
> touch, ClearSight seems to be a panacea for most any lens cleaning
> situation, and the MC2 - until I discovered ClearSight - worked best on
> some multi-coated filters.
> 
> The micro-fiber and other "magic" cloths seem no better than a properly
> washed and dried 100% cotton T-shirt.
> 
> I think the biggest scam is lens cleaning tissue.  It's relatively rough -
> almost abrasive in some ways - and has been known to contribute to
> micro-scratches on some lenses.  I ruined a ST 20mm using that Kodak lens
> tissue and cleaning fluid.
> 
> Newer lenses with more advanced and harder coatings may be able to endure
> more turns at being cleaned with lens tissue, but with  products like
> ClearSight and others, why take a chance.
> 
> One thing of note: a lot of people feel it's not necessary to clean a lens
> or a filter too often.  I've been on the set of a couple of major motion
> pictures over the years, and found it interesting to see how the filters
> and sometimes the lenses were cleaned after each set up.  OTOH, if you ever
> saw Nachtwey shoot, in awful circumstances, you might notice that he
> sometimes doesn't even use a lens hood.  One motorsport photog I met had
> the filthiest filter on his lens that I'd ever seen (I'd have just thrown
> it away!), yet he was selling his photos.  
> 
> So, IMHO, it seems that there's a lot of leeway when it comes to techniques
> and materials.  ClearSight and the properly laundered and dried 100%
> cottonT-shirt do it for me.
> 
> Shel

Hmmm.  You talked about "properly cleaning" t-shirts twice.  Care to elucidate?

(Bet they don't get anything as esoteric as this on other photography 
lists.....)

> 
> 
> 
> > [Original Message]
> > From: Paul Stenquist 
> 
> > I agree. I think the lens pen is a scam. It does absorb some oil, but  
> > I think it could damage a coating as well. It might also fill some  
> > scratches, which might make the lens look better, but it won't work  
> > better.
> > I use a solvent, which is probably similar to that on the site Shel  
> > referenced. It's called Delta 1 OFR Oil Film Remover, and it's  
> > formulated to cut oil, which is the major problem on lens surfaces.  
> > And I use it with a microfiber cloth. It does a superb job, and it's  
> > available at good camera stores. You'll also find it here: http:// 
> > cinemasupplies.stores.yahoo.net/de1ofrlecl20.html
> 
> 
> 
> -- 
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> 


-----------------------------------------
Email sent from www.ntlworld.com
Virus-checked using McAfee(R) Software 
Visit www.ntlworld.com/security for more information


-- 
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net

Reply via email to