Probably Aperture Priority, Since it is my most frequently used mode. Regards Patrick
On 1/3/07, Boris Liberman <[EMAIL PROTECTED]> wrote: > Patrick, what mode your K10D? Manual? Anything but manual? > > On 1/3/07, Patrick Genovese <[EMAIL PROTECTED]> wrote: > > Hi, > > > > Has anyone managed to used the 500FTZ in manual mode with a K10D ? > > > > Here's the problem i'm facing.. > > > > 1. If I leave the flash in ttl mode than is simply puts out full power > > flash bursts as expected since it does not support P-TTL. So far so > > good. > > > > 2. When i put the flash in Manual mode (press the mode button) and use > > the adjust button to adjust the power level. The power level adjusts > > accordingly but as soon as i half press the shutter release to focus, > > the flash automatically reverts to TTL mode and hencforth full power > > bursts. It seems that the camera is commanding the flash back into ttl > > mode. > > > > Has anyone seen this behaviour or am i doing something wrong. > > > > Is the behaviour the same on the DS / DL / K100 ? > > > > > > Regards > > > > Patrick Genovese > > > > -- > > PDML Pentax-Discuss Mail List > > PDML@pdml.net > > http://pdml.net/mailman/listinfo/pdml_pdml.net > > > > > -- > Boris > > -- > PDML Pentax-Discuss Mail List > PDML@pdml.net > http://pdml.net/mailman/listinfo/pdml_pdml.net > -- Regards Patrick Genovese -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net
