An Epson 4490 flatbed ($109 refurbished from epson.com) is also a better solution. With the addition of 1-2 35mm ANR inserts from betterscanning.com it makes a cheap but quite acceptable 35mm scanning solution (Without the inserts get ready for newton-rings or film curvature problems). As a bonus, it does 120/220 as well.
-Adam Paul Stenquist wrote: > There are at least two ways to do this that are preferable to what > you propose: > One: Shoot BW film and scan it on a good film scanner. > Two: Shoot digital and convert it to BW. > Paul > On Nov 17, 2007, at 10:06 PM, Beaker wrote: > >> Hi- >> >> Has anyone used a bellows type slide copier on a digital SLR? Or am I >> just being silly again? >> >> I'm thinking about getting a roll of B&W film and hunting up my old >> reels and tank, so I can do B&W film on the cheap. >> I realize a film scanner is a better way to go about this, but an e- >> bay slide copier is pretty inexpensive. >> Another benefit- with adapters, I can use an M42 copier on both my >> Pentax & Canon DSLR. >> >> By the way, what focal length lens would give full-frame copies? >> >> Thanks for your help- >> Mike Beacom >> >> -- >> PDML Pentax-Discuss Mail List >> PDML@pdml.net >> http://pdml.net/mailman/listinfo/pdml_pdml.net >> to UNSUBSCRIBE from the PDML, please visit the link directly above >> and follow the directions. > > -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.