----- Original Message ----- From: "Michel Adam" < Subject: 67 film advance question
> Help needed: > > > I just loaded a roll of 220 in the 67. I did make sure the > pressure plate was set to 220, and then advanced it so that > the counter shows '0'. > > But only then did I remember to turn the right switch to 220. > > Will I be able to shoot more than 10 frames? In other words, > does the 120/220 switch on the side have to be set BEFORE you > close the back and start winding? > > Do I have to go in the darkroom and open the back and try > to salvage the situation? As long as you switch the counter to 220 before you hit frame 10, it will advance properly through the entire film. I am, at this moment, admiring my 6x7 and 90mm LS lens mounted to a bellows. Very impressive. William Robb - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .