Hi, I think what you have is the remote battery pack, which is a power source for the Winder LX or ME II, It's used for keeping the power source warm during cold weather.
--- Bob mailto:[EMAIL PROTECTED] Friday, January 25, 2002, 7:05:36 PM, you wrote: > I am hoping to solve a winder problem and a remote cord mystery, > with your help. > I have a winder that will work on my two better-conditioned LXs, but > will not on the two that have seen the most (ab)use. On the two that it > will not work, if I loosen the winder I can get it to trigger. I originally > thought that the shutter was not going down far enough, but it does - off > the winder. I hope to look at it this weekend. I would not mind if someone > familiar with the workings of the winder could give me some pointers. I > would like to try the adjustment myself. I am more apt to use the winder on > the two (ab)used cameras and would like to get them fully operational. > Secondly, I have a remote cord that matches the one shown on Bozīs > site and on the LX accessories sheet that I got with my new one. This is > the remote I have seen mentioned about working on the MEII winder, I think. > I have another one that says LX on it, takes batteries, has an ON OFF switch > and can be seen in the first two photos at > http://cesar_abdul.homestead.com/LX.html I cannot find a reference to it. > Mine will trigger the winder with the switch in the on or off postion. - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
