the 16-50 has screw drive alright but when SDM dies it won't default
back to screw drive on a body that supports SDM.

pentax says they're aware that people are complaining but defect
ratios do not differ significantly from other product lines. assuming
that is true it doesn't make things better for those affected but
speaks volume about the i'net as a negative multiplier

cheers
ecke

2010/11/26  <drd1...@gmail.com>:
> I have to admit this is not encouraging me to invest in a new Pentax zoom. 
> That's a. Lot of $$$ for a lens that can just stop AFing. IIRC it has no 
> screw drive, correct?
> -----Original Message-----
> From: P N Stenquist <pnstenqu...@comcast.net>
> Sender: pdml-boun...@pdml.net
> Date: Fri, 26 Nov 2010 10:38:03
> To: Pentax-Discuss Mail List<pdml@pdml.net>
> Reply-To: Pentax-Discuss Mail List <pdml@pdml.net>
> Subject: Re: HSM  -- Restart?
>
> HI Morris,
> Make sure your manual/automatic switch isn't set wrong or in between the 
> marks. If that's not it, focus manually a few times and see if the HSM comes 
> back.
> Paul
>
> On Nov 26, 2010, at 9:55 AM, Morris Galloway wrote:
>
>> Is there a 'kink' or 'trick' to getting the HSM to work again once it has 
>> failed... other than a trip to C.R.I.S.?
>>
>> The Patient is a 16-50 DA*.
>>
>> --
>> PDML Pentax-Discuss Mail List
>> PDML@pdml.net
>> http://pdml.net/mailman/listinfo/pdml_pdml.net
>> to UNSUBSCRIBE from the PDML, please visit the link directly above and 
>> follow the directions.
>
>
> --
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.
> --
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.
>

-- 
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to