MX and LX screens are mechanically interchangeable. You just have to compensate for the difference in brightness level if your meter is in the prism.
At 10:11 PM 2/13/2002 +0100, you wrote: >You can use Mx focusing screens on Pz1p, I did It, but I don´t know if >it is possible with Lx ones. >What about mz-s screens?? > >-----Mensaje original----- >De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] >En nombre de Frantisek Vlcek >Enviado el: miércoles, 13 de febrero de 2002 20:16 >Para: Minihane Michael - mminih >Asunto: Re: Z-1p focusing screens on other bodies? > >Hi Minihane, it is relatively easy. No qualified technician is needed >at all! AFAIK Pz1p screen should fit into all older pentaxes (but not >all vice versa, LX and MX screens are bigger than the newer ones so >won't fit into AF bodies). > >For MZ5n, MZ-M, Super-A,... , the screen is the same, the holding >frame is the same, it IIRC drops down in same way, only is not hold by >spring tab but by few screws, which you unscrew. There are few people >here who did it to Mz-5n, ask them. Also, this should work for >Super-A, which would be really improved by MZ-M's screen. > >Frantisek >- >This message is from the Pentax-Discuss Mail List. To unsubscribe, >go to http://www.pdml.net and follow the directions. Don't forget to >visit the Pentax Users' Gallery at http://pug.komkon.org . >- >This message is from the Pentax-Discuss Mail List. To unsubscribe, >go to http://www.pdml.net and follow the directions. Don't forget to >visit the Pentax Users' Gallery at http://pug.komkon.org . - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
