I've never held this lens before, but rear elements are generally the
easiest to remove; I've removed quite a few in order to get to oily
aperture blades.

I'd REALLY like to see a photo of the dead moth!  :-)

Cheers,

   —M.

    \/\/o/\/\ --> http://WorldOfMiserere.com

    http://EnticingTheLight.com
    A Quest for Photographic Enlightenment



On 7 November 2012 09:54, Krisjanis Linkevics
<krisjanis.linkev...@exigenservices.com> wrote:
> Some of you might remember my FA135 that a moth took hostage. Long story 
> short there is a dead moth right behind the back element. If nothing else, it 
> is messing with focusing, so I would very much like to get rid of its carcas 
> and debris.
>
> So half a year ago I went to my local Pentax dealer and the lens was sent off 
> to be "fixed". After long travels to the Czech Republic and Germany it 
> finally came back today. Nobody has even tried to take it apart. They say 
> they can't fix it.
>
> So my question is - do I try to take it apart or give it to some local 
> repairman to attempt a repair? I haven't seen any schematics floating around 
> and have no idea what it would take to remove the back element but I have 
> about as much trust in a nondescript repair shop in a basement somewhere as I 
> do in my own fingers.
>
> kris
>
> --
> PDML Pentax-Discuss Mail List
> PDML@pdml.net
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
> the directions.

-- 
PDML Pentax-Discuss Mail List
PDML@pdml.net
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to