One of us PDMLers mentioned here to do the following after removing the battery:- a) Wait (2) mins, then w/o the battery ON the camera, Press a few buttons. b) Change to a new SDHC Card which has been formatted in the camera. c) Put a different lens, after cleaning the lens & body contacts. d) Install a freshly charged battery and then test the camera. Make sure the chrome plated battery terminals are cleaned with a Q-tip dipped in pure alcohol and then polished off with a soft cloth. e) Re-apply the firmware if in doubt. Always use the latest firmware, and don't be afraid to apply it. Pentax-Ricoh are known to cram improvements w/o disclosing every thing. I think these steps ensure the motherboard is neutralized of all electrical charges and that all contacts are firm + others. Give it a try the next time. Regards. Bipin - from that far away enchanting land.
-- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.