> The story here is:
> >> Mar 26 13:10:35 Exiting because communicator thread died with STL error:
> >> Creating local resolver socket for ::, does your OS miss IPv6?: Bad file
> >> descriptor
>
> PowerDNS can?t generate an IPv6 socket. You can probably solve that by
> setting: query-local-address6=
>
> In the config file. This will disable PowerDNS from attempting to open up an
> IPv6 socket for notifications.
>
After reading that the first thing I though of was the sysctl parameter
security.jail.allow_raw_sockets
So I installed pdns in a jail today and am able to launch without above setting
at the host,
using for pdns only:
master=yes
launch=bind
local-address=85.255.x.x
local-ipv6=2a00:x:x::x
...and all working fine without such error as reported.
After reading Bert's reply I asume you specificly enabled recursion ...?
Anyway, I've added:
allow-recursion=1.0.0.0/8
recursor=2600::1 # sprint
...and again no such error.
In case you're not using GENERIC, then was INET6 removed in your custom kernel?
I used 10.1-RELEASE-p8, VERY stripped down.
Further at the host level I'm having in /etc/rc.conf:
ipv6_network_interfaces="igb0 em0 vlan53 etc3"
# or (since above probably is pre 10):
ipv6_activate_all_interfaces="YES"
...otherwise you wont get the fe80::etc at boot, and IPv6 will be impossible.
With above sysctl rule you can allow ping6 to jails.
Are you able to ping 2600::2 from inside the jail ...?
--
Met vriendelijke groet,
With kind regards,
Leo Vandewoestijne
--
Sent from my Project ARA - Spiral 3 phone
_______________________________________________
Pdns-users mailing list
[email protected]
http://mailman.powerdns.com/mailman/listinfo/pdns-users
