We are currently attempting to get all our products to meet the new
requirements for the EN60601-1-2-2001 by the November 1st deadline. We have
all our products updated to the new requirements except for one. We have
been having some difficulty with the new Conducted RF immunity test
EN61000-4-6 / ENV50141 on this product. This test basically takes an AM
modulated signal with a 3V level in the range of 150k to 80 meg and couples
it into all I/O and power cables using a bulk current injection probe clamp.
Our system is detecting the induced interference and shutting down
indicating a fault condition exists. Unfortunately this is considered a
failure for this test. Has anyone had any experience trying to comply to
this test. We have tried filtering several critical signals to prevent the
faults, but the induced signal seems to everywhere. Any suggestions would be
helpful at this point.

Thanking any and all in advance.

Tom Robinson

This  message and any file transmitted with it may contain confidential
information and is exempt from disclosure under applicable law.  The
information contained in this message and any file transmitted with it
is transmitted in this form based on a reasonable expectation of
privacy.  Any disclosure, distribution, copying or use of the
information by anyone other than the intended recipient, regardless of
address or routing, is strictly prohibited. If you have received this
message in error, please advise the sender by immediate reply and delete
the original message. Personal messages express views solely of the
sender and are not attributable to Biodex Medical Systems, Inc.

 
____________________________________________________________
You are subscribed to the PEDA discussion forum

To Post messages:
mailto:[EMAIL PROTECTED]

Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com

Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[EMAIL PROTECTED]
 
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[EMAIL PROTECTED]

Reply via email to