They are old Cadstar pcb files. Cadstar had a free utility to translate the .cdo binary into the .cdi ascii file called upload. There is a free utility to translate .cdi files directly into protel .pcb. I'm stuck for time but both are available on the protel-users yahoo group. You'll need to register first. I used them a few years back, worked pretty well.
Rich -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Website Visitor Sent: 13 April 2005 18:35 To: [email protected] Subject: [PEDA] Importing .cdo files We have been asked if Protel will import a binary .cdo file. We are requested to modify some tracks but only the gerber and .cdo files are available. I would be grateful for comments via email please. [EMAIL PROTECTED] Posted from Association web site by: Aidan Bettison ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected] ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
