Dilip,
The program is doing exactly what it is intended to do. There is no
functionality built into the program to do related/linked schematics as
separate PCB designs within the same project. You would use a separate (not
linked) schematic for each separate PCB.
I would suggest that your schematic pages could be opened separately
and each schematic implemented as a separate PCB. You can leave your schematic
links for an overall schematic of the Project or multiple boards, but each
schematic must be used individually for each PCB.
Sincerely,
Brad Velander
Senior PCB Designer
Northern Airborne Technology
#14 - 1925 Kirschner Road,
Kelowna, BC, V1Y 4N7.
tel (250) 763-2329 ext. 225
fax (250) 762-3374
-----Original Message-----
From: Website Visitor [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 22, 2005 2:37 AM
To: [email protected]
Subject: [PEDA] problem regarding to multiple pcbs
Dear Sir,
we are using EDA schematicfor circuit drafting . Using the schematic we
are creating multiple sheet in a single project and link them together. We are
also able to create the netlist for the same project. But when we load the
netlist in the Advance PCB Version, it loads all the components of the
different sheet of a single project in a single pcb, but we want to make
multiple pcbs using multiple sheets of a single project.
We are using.............
For schematic.....EDA 3.2 VERSION
For PCB layout......Advance PCB (Protel 2.7) VERSION
Please help me out.
My E-Mail ID [EMAIL PROTECTED]
Thanking you,
Dilip kushwaha,
(Design Engr.)
____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:[email protected]
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]
