Bob,
I was just looking at your issue for my own edification but noticed
something that might have slipped past you. In your Unknown Pins Ok screenshot,
it is listing those pins as unknown pins as well. So things were seemingly not
"OK" at that point either.
Sincerely,
Brad Velander
Senior PCB Designer
Northern Airborne Technology
#14 - 1925 Kirschner Road,
Kelowna, BC, V1Y 4N7.
tel (250) 763-2329 ext. 225
fax (250) 762-3374
-----Original Message-----
From: Bob Wirka [mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 17, 2006 7:12 AM
To: Protel EDA Discussion List
Subject: [PEDA] 6.0 Questions...
snip
The second question regards updating the pcb; AD6 tells me that it cant'
find pins for the resistor, yet it can successfully update the pcb.
Referring to "UnknownPins.png", you see that when the Validate Changes
button is pushed, it tells me that the pins on the resistor are unknown.
However, when the Execute Changes button is pushed, all is well; see
"UnknownPinsOk.png". This will probably be a problem when there are
really missing library components. How will you tell the difference
between real and imaginary errors?
Where am I going wrong?
Thank you,
Bob Wirka
Realtime Control Works
____________________________________________________________
You are subscribed to the PEDA discussion forum
To Post messages:
mailto:[email protected]
Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com
Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]
