Brad Velander wrote:
> Kathy,
>       I have read all the posts up to this morning and your problems is 
> definitely a bit mystifying. Are you sure the netlist is fine? My first 
> thoughts were that you problem was probably a net bussing problem or port 
> connection problems but that doesn't explain the netlist being correct now 
> does it?
> 
>       It is just that so many people have problems with Protel busses and I 
> don't know why, you can't bus dissimilar named nets in Protel, nor Orcad, nor 
> most tools I have ever used so I don't know why so many people think you can 
> to start with.
> 
>       Looking over your error report I can't help but still think that this 
> is a bus problem. How are you netlisting, with Nets and Ports Global I would 
> believe?
> 
>       This is stretching it but could there be two issues, could you have a 
> disconnect between ports (i.e. slight name mismatch) but the connections are 
> still being made because of the individual Nets being correct? It is getting 
> the connection from the netnames but your error is being generated because of 
> a mismatched Port or Port name?

Now you have me thinking Brad,

2 things are different here from most of my designs.

#1 I am using multiple pages (I have done a few before and had no problems)

#2 I am using buses (well one bus for everything)

I might have to split the bus into misc and Address and Data :(

ERC and Netlisting is by netlabel and ports global (I do not have any 
ports as they were causing other problems.



-- 
Regards,

Kat.
---------------------------------------------------------------
  K.A.Q. Electronics     Website: www.kaqelectronics.dyndns.org
  IM: Yahoo: PinkyDwaggy MSN: [EMAIL PROTECTED]
  For Everything Electronics               Phone: 0419 923 731
---------------------------------------------------------------


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.3.2/294 - Release Date: 27/03/2006

 
____________________________________________________________
You are subscribed to the PEDA discussion forum

To Post messages:
mailto:[email protected]

Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com

Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
 
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]

Reply via email to