Bill, DXP will import a netlist . AD6 will not unless you use the latest service pack ( yes Virginia there is a new release for AD6). The command is Project , Show Differenced, Advanced mode, pick the netlist and pick the PCB. Both Netlist and PCB must reside in same project. You are correct you can not IMPORT a netlest anymore. That feature went away witth DXP. Shame on Altium for taking this out. Shame on Altium that I had to point out that they completely removed loading a foreign netlist into AD6. They tell me they have put it back in Mike Reagan
***************************************************************************** The information contained in, or attached to, this e-mail, may contain confidential information and is intended solely for the use of the individual or entity to whom they are addressed and may be subject to legal privilege. If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email. ***************************************************************************** <<<<GWAVAsig>>>> ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
