This is a message from the Museumpests List.
To post to this list send it as an email to pestlist@museumpests.net
To unsubscribe please look at the footer of this email.
-----------------------------------------------------------
Hi everyone,
Any comments on this recent story on bedbugs in the NY Times? If people don't 
want to use heat treatment and have access to low temperature and follow the 
protocols, that should work, right?

http://www.nytimes.com/2012/12/06/garden/bedbugs-hitch-a-ride-on-library-books.html?pagewanted=all

Emily

From: ad...@museumpests.net [mailto:ad...@museumpests.net] On Behalf Of 
bugma...@aol.com
Sent: Sunday, August 26, 2012 4:54 PM
To: pestlist@museumpests.net
Subject: Re: [pestlist] heat treatment

This is a message from the Museumpests List.
To post to this list send it as an email to 
pestlist@museumpests.net<mailto:pestlist@museumpests.net>
To unsubscribe please look at the footer of this email.
-----------------------------------------------------------
Barbara -

The rule-of-thumb is 130 degrees Fahrenheit for 3 hours will kill any stage of 
any insect.  When pest management firms super heat a home for bed bugs, they 
leave the heat for the better part of the day to insure it reached that level 
in all materials and areas of the home.

When it comes to killing insects in wood, commercial kiln-drying of lumber only 
reaches about 108 to 115.  Often larvae in wood are not killed in the kiln 
because the wood is a good insulator.  I've been involved in powderpost beetle, 
wood-boring wasp larvae, and old house borer infestations in kiln-dried lumber, 
including hardwood flooring.

An easy method for items of lesser value, is to place a pan of water on the 
bottom rack of a kitchen oven in order to maintain high humidity in the oven.  
Place the object directly onto an upper rack.  Then turn the oven to its "warm" 
setting, which usually is 170 degrees Fahrenheit.  Leave the object in for 3 
hours and then turn the oven off, leaving the  object inside.  When the oven is 
cool, you can remove the object.

I've used this method for powderpost beetles in objects purchased by tourists 
in various countries.  It can probably also be used for certain kinds of 
fabrics made of natural materials.  I would not try it on synthetic fabrics; 
they might melt.

Tom Parker

ms email l...@collectionpests.com<mailto:l...@collectionpests.com> or 
l...@zaks.com<mailto:l...@zaks.com>


----------------------------------------------------------------------
To send an email to the list, send your msg to pestlist@museumpests.Net

To unsubscribe from this list send an email to pestlist@museumpests.net and in 
the subject put:
"unsubscribe" - no quotes please.

You are receiving the Pestlist emails in standard mode.
To change to the DIGEST mode send an 
email to imail...@museumpests.net with this command in the body:

set mode digest pestlist

Any problems email l...@collectionpests.com or l...@zaks.com

Reply via email to