Here the messages
1. lspci
00:00.0 Host bridge: VIA Technologies, Inc. P/KN266 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0
CardBus/SmartCardBus Controller
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21
IEEE-1394a-2000 Controller (PHY/Link)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
02:00.0 Network controller: Intersil Corporation ISL3890 [Prism
GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
2.lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
3. lspcmcia
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:00:0a.0)
CardBus card -- see "lspci" for more information
Given that the card is not USB, the lsusb gave the correct results.
I cannot see anything related to my card in the lspci result, but I
guess it is fine, since my card is inserted into the pcmcia slot.
Then, the results from lspcmcia left me baffled.
To my limited knowledge, linux can see that there is a cardbus card,
but does not get the correct type.
Is my deduction correct?
Finally, here the long results for
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-17-generic ([EMAIL PROTECTED]) (gcc
version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu May 1 14:31:33 UTC
2008 (Ubuntu 2.6.24-17.31-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 122864) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 122864
[ 0.000000] HighMem 122864 -> 122864
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 122864
[ 0.000000] On node 0 totalpages: 122864
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 927 pages used for memmap
[ 0.000000] Normal zone: 117841 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00E5010 checksum 0
[ 0.000000] ACPI: RSDP 000E5010, 0014 (r0 OID_00)
[ 0.000000] ACPI: RSDT 1DFFFBC0, 0030 (r1 INSYDE RSDT_000 1
_CSI 10101)
[ 0.000000] ACPI: FACP 1DFFFAC0, 0074 (r1 INSYDE FACP_000 100
_CSI 10101)
[ 0.000000] ACPI: DSDT 1DFFC6E0, 33DA (r1 INSYDE KN266 1000
MSFT 100000E)
[ 0.000000] ACPI: FACS 1DFFFFC0, 0040
[ 0.000000] ACPI: BOOT 1DFFFB50, 0028 (r1 INSYDE SYS_BOOT 100
_CSI 10101)
[ 0.000000] ACPI: DBGP 1DFFFB80, 0034 (r1 INSYDE DBGP_000 100
_CSI 10101)
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
1e000000:e1f80000)
[ 0.000000] swsusp: Registered nosave memory region:
000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region:
00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 121905
[ 0.000000] Kernel command line:
root=UUID=a51fe12c-472f-403c-9b84-21ee7eb89d86 ro quiet splash
pci=noacpi noapic nolapic
[ 0.000000] mapped APIC to ffffb000 (013cd000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1658.534 MHz processor.
[ 16.517946] Console: colour VGA+ 80x25
[ 16.517952] console [tty0] enabled
[ 16.518449] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 16.518895] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.541140] Memory: 475268k/491456k available (2176k kernel code,
15660k reserved, 1007k data, 368k init, 0k highmem)
[ 16.541151] virtual kernel memory layout:
[ 16.541152] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 16.541154] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 16.541155] vmalloc : 0xde800000 - 0xff7fe000 ( 527 MB)
[ 16.541157] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB)
[ 16.541158] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 16.541160] .data : 0xc0320134 - 0xc041bdc4 (1007 kB)
[ 16.541161] .text : 0xc0100000 - 0xc0320134 (2176 kB)
[ 16.541165] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 16.541236] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4,
CPUs=1, Nodes=1
[ 16.621225] Calibrating delay using timer specific routine..
3321.91 BogoMIPS (lpj=6643830)
[ 16.621269] Security Framework initialized
[ 16.621279] SELinux: Disabled at boot.
[ 16.621306] AppArmor: AppArmor initialized
[ 16.621313] Failure registering capabilities with primary security module.
[ 16.621328] Mount-cache hash table entries: 512
[ 16.621514] Initializing cgroup subsys ns
[ 16.621521] Initializing cgroup subsys cpuacct
[ 16.621536] CPU: After generic identify, caps: 0183f9ff c1cbf9ff
00000000 00000000 00000000 00000000 00000000 00000000
[ 16.621546] Enabling disabled K7/SSE Support.
[ 16.621551] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 16.621554] CPU: L2 Cache: 256K (64 bytes/line)
[ 16.621558] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000
00000420 00000000 00000000 00000000 00000000
[ 16.621572] Compat vDSO mapped to ffffe000.
[ 16.621589] Checking 'hlt' instruction... OK.
[ 16.637540] SMP alternatives: switching to UP code
[ 16.639038] Freeing SMP alternatives: 11k freed
[ 16.639270] Early unpacking initramfs... done
[ 17.060518] ACPI: Core revision 20070126
[ 17.060690] ACPI: Looking for DSDT in initramfs... error, file
/DSDT.aml not found.
[ 17.072873] CPU0: AMD Athlon(tm) XP 2000+ stepping 01
[ 17.072883] SMP motherboard not detected.
[ 17.072887] Local APIC not detected. Using dummy APIC emulation.
[ 17.073048] Brought up 1 CPUs
[ 17.073098] CPU0 attaching sched-domain:
[ 17.073103] domain 0: span 01
[ 17.073105] groups: 01
[ 17.073485] net_namespace: 64 bytes
[ 17.073498] Booting paravirtualized kernel on bare hardware
[ 17.074118] Time: 14:46:09 Date: 06/03/08
[ 17.074181] NET: Registered protocol family 16
[ 17.074506] EISA bus registered
[ 17.074531] ACPI: bus type pci registered
[ 17.074760] PCI: PCI BIOS revision 2.10 entry at 0xe8a04, last bus=1
[ 17.074763] PCI: Using configuration type 1
[ 17.074765] Setting up standard PCI resources
[ 17.077829] ACPI: EC: Look up EC in DSDT
[ 17.091662] ACPI: Interpreter enabled
[ 17.091667] ACPI: (supports S0 S3 S4 S5)
[ 17.091686] ACPI: Using PIC for interrupt routing
[ 17.095459] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 17.097747] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[ 17.097752] ACPI: EC: driver started in interrupt mode
[ 17.097872] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 17.097926] pnp: PnP ACPI init
[ 17.097937] ACPI: bus type pnp registered
[ 17.101086] pnp: PnP ACPI: found 11 devices
[ 17.101091] ACPI: ACPI bus type pnp unregistered
[ 17.101098] PnPBIOS: Disabled by ACPI PNP
[ 17.101483] PCI: Probing PCI hardware
[ 17.101492] PCI: Probing PCI hardware (bus 00)
[ 17.101921] PCI quirk: region 1000-107f claimed by vt8235 PM
[ 17.101926] PCI quirk: region 1400-140f claimed by vt8235 SMB
[ 17.103161] PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
[ 17.103178] PCI: setting IRQ 10 as level-triggered
[ 17.103182] PCI: Found IRQ 10 for device 0000:00:10.1
[ 17.103218] PCI: Cannot allocate resource region 0 of device 0000:00:0a.0
[ 17.113066] NET: Registered protocol family 8
[ 17.113070] NET: Registered protocol family 20
[ 17.113220] AppArmor: AppArmor Filesystem Enabled
[ 17.116918] Time: tsc clocksource has been installed.
[ 17.124980] system 00:03: iomem range 0xfffc0000-0xffffffff could
not be reserved
[ 17.124992] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 17.124997] system 00:05: ioport range 0x1400-0x140f has been reserved
[ 17.125000] system 00:05: ioport range 0x1600-0x167f has been reserved
[ 17.125004] system 00:05: ioport range 0x2c8-0x2cf has been reserved
[ 17.125007] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 17.125010] system 00:05: ioport range 0x600-0x60f has been reserved
[ 17.125014] system 00:05: ioport range 0x3e0-0x3e3 has been reserved
[ 17.125018] system 00:05: iomem range 0xd4000-0xd7fff has been reserved
[ 17.155663] PCI: Bridge: 0000:00:01.0
[ 17.155667] IO window: c000-dfff
[ 17.155672] MEM window: e0000000-efffffff
[ 17.155676] PREFETCH window: a0000000-afffffff
[ 17.155682] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[ 17.155684] IO window: 00001800-000018ff
[ 17.155689] IO window: 00001c00-00001cff
[ 17.155693] PREFETCH window: 20000000-23ffffff
[ 17.155697] MEM window: 24000000-27ffffff
[ 17.155717] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 17.155736] PCI: setting IRQ 11 as level-triggered
[ 17.155740] PCI: Assigned IRQ 11 for device 0000:00:0a.0
[ 17.155750] PCI: Sharing IRQ 11 with 0000:00:10.3
[ 17.155776] NET: Registered protocol family 2
[ 17.193041] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 17.193363] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 17.193730] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 17.194128] TCP: Hash tables configured (established 16384 bind 16384)
[ 17.194132] TCP reno registered
[ 17.205103] checking if image is initramfs... it is
[ 17.656642] Switched to high resolution mode on CPU 0
[ 17.987089] Freeing initrd memory: 7273k freed
[ 17.987397] Simple Boot Flag at 0x37 set to 0x1
[ 17.988091] audit: initializing netlink socket (disabled)
[ 17.988114] audit(1212504370.436:1): initialized
[ 17.991319] VFS: Disk quotas dquot_6.5.1
[ 17.991442] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.991834] io scheduler noop registered
[ 17.991838] io scheduler anticipatory registered
[ 17.991841] io scheduler deadline registered
[ 17.991855] io scheduler cfq registered (default)
[ 17.991879] PCI: VIA PCI bridge detected. Disabling DAC.
[ 17.991942] Boot video device is 0000:01:00.0
[ 17.992353] isapnp: Scanning for PnP cards...
[ 18.346067] isapnp: No Plug & Play device found
[ 18.392936] Real Time Clock Driver v1.12ac
[ 18.393119] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports,
IRQ sharing enabled
[ 18.394880] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 18.394996] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 18.395150] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 18.410242] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 18.421137] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 18.421144] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 18.421148] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 18.421151] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 18.421153] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 18.432081] mice: PS/2 mouse device common for all mice
[ 18.432266] EISA: Probing bus 0 at eisa.0
[ 18.432280] Cannot allocate resource for EISA slot 1
[ 18.432311] EISA: Detected 0 cards.
[ 18.432318] cpuidle: using governor ladder
[ 18.432320] cpuidle: using governor menu
[ 18.432578] NET: Registered protocol family 1
[ 18.432630] Using IPI No-Shortcut mode
[ 18.432702] registered taskstats version 1
[ 18.432848] Magic number: 12:942:787
[ 18.433130] hash matches device ptyq9
[ 18.433234] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 18.433237] EDD information not available.
[ 18.434115] Freeing unused kernel memory: 368k freed
[ 18.464022] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 19.743739] fuse init (API version 7.9)
[ 19.773105] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 19.776814] ACPI: Thermal Zone [THRM] (41 C)
[ 20.612143] usbcore: registered new interface driver usbfs
[ 20.612191] usbcore: registered new interface driver hub
[ 20.628166] PCI: setting IRQ 5 as level-triggered
[ 20.628176] PCI: Found IRQ 5 for device 0000:00:0c.0
[ 20.628194] PCI: Sharing IRQ 5 with 0000:00:11.5
[ 20.628198] PCI: Sharing IRQ 5 with 0000:00:11.6
[ 20.678097] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]
MMIO=[f0000000-f00007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.710900] usbcore: registered new device driver usb
[ 20.722763] SCSI subsystem initialized
[ 20.786368] USB Universal Host Controller Interface driver v3.0
[ 20.806334] libata version 3.00 loaded.
[ 20.850381] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 20.859846] PCI: Found IRQ 11 for device 0000:00:10.0
[ 20.859872] PCI: Sharing IRQ 11 with 0000:00:12.0
[ 20.859876] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 20.859893] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 20.860539] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 20.860580] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[ 20.860832] usb usb1: configuration #1 chosen from 1 choice
[ 20.860869] hub 1-0:1.0: USB hub found
[ 20.860880] hub 1-0:1.0: 2 ports detected
[ 20.962416] PCI: Found IRQ 10 for device 0000:00:10.1
[ 20.962447] PCI: VIA VLink IRQ fixup for 0000:00:10.1, from 255 to 10
[ 20.962481] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 20.962520] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 20.962555] uhci_hcd 0000:00:10.1: irq 10, io base 0x00001300
[ 20.962738] usb usb2: configuration #1 chosen from 1 choice
[ 20.962774] hub 2-0:1.0: USB hub found
[ 20.962784] hub 2-0:1.0: 2 ports detected
[ 20.994324] Floppy drive(s): fd0 is 1.44M
[ 21.013517] FDC 0 is a National Semiconductor PC87306
[ 21.066597] PCI: Found IRQ 11 for device 0000:00:10.3
[ 21.066610] PCI: Sharing IRQ 11 with 0000:00:0a.0
[ 21.066627] PCI: VIA VLink IRQ fixup for 0000:00:10.3, from 0 to 11
[ 21.066663] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 21.066709] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 3
[ 21.066775] ehci_hcd 0000:00:10.3: irq 11, io mem 0xf4000000
[ 21.078107] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
[ 21.078329] usb usb3: configuration #1 chosen from 1 choice
[ 21.078367] hub 3-0:1.0: USB hub found
[ 21.078381] hub 3-0:1.0: 4 ports detected
[ 21.182392] PCI: Found IRQ 11 for device 0000:00:12.0
[ 21.182406] PCI: Sharing IRQ 11 with 0000:00:10.0
[ 21.182418] PCI: Sharing IRQ 11 with 0000:01:00.0
[ 21.187059] eth0: VIA Rhine II at 0xf0008000, 00:c0:9f:22:2d:b8, IRQ 11.
[ 21.187774] eth0: MII PHY found at address 1, status 0x7829
advertising 01e1 Link 40a1.
[ 21.199407] pata_via 0000:00:11.1: version 0.3.3
[ 21.201924] scsi0 : pata_via
[ 21.204059] scsi1 : pata_via
[ 21.204155] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[ 21.204159] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[ 21.366572] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100
[ 21.366580] ata1.00: 58605120 sectors, multi 16: LBA
[ 21.382437] ata1.00: configured for UDMA/100
[ 21.702043] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UX08, max UDMA/33
[ 21.873840] ata2.00: configured for UDMA/33
[ 21.874087] scsi 0:0:0:0: Direct-Access ATA
IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5
[ 21.874730] scsi 1:0:0:0: CD-ROM QSI CDRW/DVD
SBW-242 UX08 PQ: 0 ANSI: 5
[ 22.058486] Driver 'sd' needs updating - please use bus_type methods
[ 22.058655] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 22.058676] sd 0:0:0:0: [sda] Write Protect is off
[ 22.058679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.058704] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 22.058780] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 22.058794] sd 0:0:0:0: [sda] Write Protect is off
[ 22.058797] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.058816] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 22.058824] sda:<4>Driver 'sr' needs updating - please use
bus_type methods
[ 22.079830] sda1 sda2 < sda5 sda6 >
[ 22.120218] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.129255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.129342] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 22.129654] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000040107]
[ 22.133803] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 22.133815] Uniform CD-ROM driver Revision: 3.20
[ 22.133921] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 22.722668] Attempting manual resume
[ 22.722676] swsusp: Resume From Partition 8:6
[ 22.722678] PM: Checking swsusp image.
[ 22.722999] PM: Resume from disk failed.
[ 22.769881] kjournald starting. Commit interval 5 seconds
[ 22.769910] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.919549] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 47.739838] input: PS/2 Mouse as /devices/virtual/input/input3
[ 47.788951] input: AlpsPS/2 ALPS GlidePoint as
/devices/platform/i8042/serio4/input/input4
[ 47.821462] parport_pc 00:0a: reported by Plug and Play ACPI
[ 47.821522] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 47.886735] Linux agpgart interface v0.102
[ 47.914802] agpgart: Detected VIA Apollo Pro266 chipset
[ 47.926716] agpgart: AGP aperture is 128M @ 0xb0000000
[ 47.982712] ACPI: WMI-Acer: Mapper loaded
[ 48.223233] Yenta: CardBus bridge found at 0000:00:0a.0 [10cf:10e7]
[ 48.223259] Yenta O2: res at 0x94/0xD4: 00/ea
[ 48.223262] Yenta O2: enabling read prefetch/write burst
[ 48.258861] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 48.350631] Yenta: ISA IRQ mask 0x0018, PCI irq 11
[ 48.350639] Socket status: 30000821
[ 48.362339] irda_init()
[ 48.362387] NET: Registered protocol family 23
[ 48.382818] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.562188] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 48.562208] acer_acpi: No or unsupported WMI interface, unable to load.
[ 48.634332] input: Power Button (FF) as /devices/virtual/input/input5
[ 48.662141] ACPI: Power Button (FF) [PWRF]
[ 48.662258] input: Lid Switch as /devices/virtual/input/input6
[ 48.674267] ACPI: Lid Switch [LID]
[ 48.674370] input: Power Button (CM) as /devices/virtual/input/input7
[ 48.708475] ACPI: Power Button (CM) [PBTN]
[ 49.022681] pccard: CardBus card inserted into slot 0
[ 49.529071] ACPI: AC Adapter [ADP0] (on-line)
[ 49.765680] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8
[ 49.793339] ACPI: Video Device [VGA0] (multi-head: yes rom: no post: no)
[ 50.028717] ACPI: Battery Slot [BAT0] (battery present)
[ 51.018305] PCI: Found IRQ 5 for device 0000:00:11.6
[ 51.018319] PCI: Sharing IRQ 5 with 0000:00:0c.0
[ 51.018329] PCI: Sharing IRQ 5 with 0000:00:11.5
[ 51.767863] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 52.375461] ALSA
/build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/sound/alsa-driver/pci/ac97/ac97_codec.c:2160: MC'97 0 converters and GPIO not ready
(0x1)
[ 52.377003] PCI: Found IRQ 5 for device 0000:00:11.5
[ 52.377015] PCI: Sharing IRQ 5 with 0000:00:0c.0
[ 52.377027] PCI: Sharing IRQ 5 with 0000:00:11.6
[ 52.377174] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 53.224648] cs: IO port probe 0x100-0x3af: clean.
[ 53.226352] cs: IO port probe 0x3e0-0x4ff: clean.
[ 53.227134] cs: IO port probe 0x820-0x8ff: clean.
[ 53.227760] cs: IO port probe 0xc00-0xcf7: clean.
[ 53.228591] cs: IO port probe 0xa00-0xaff: clean.
[ 53.396248] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 53.396273] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 53.486819] p54: LM86 firmware
[ 53.486828] p54: FW rev 2.7.0.0 - Softmac protocol 4.1
[ 54.408615] phy0: Selected rate control algorithm 'simple'
[ 54.536798] phy0: hwaddr 00:09:5b:c9:8f:c0, isl3890
[ 55.363956] lp0: using parport0 (interrupt-driven).
[ 55.491609] Adding 1646620k swap on /dev/sda6. Priority:-1
extents:1 across:1646620k
[ 56.181043] EXT3 FS on sda5, internal journal
[ 58.154481] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 59.409049] No dock devices found.
[ 59.892201] powernow: PowerNOW! Technology present. Can scale:
frequency and voltage.
[ 59.898118] powernow: SGTC: 13333
[ 59.898122] powernow: Minimum speed 663 MHz. Maximum speed 1658 MHz.
[ 62.251799] ppdev: user-space parallel port driver
[ 62.423010] audit(1212500815.228:2): type=1503
operation="inode_permission" requested_mask="a::" denied_mask="a::"
name="/dev/tty" pid=4799 profile="/usr/sbin/cupsd" namespace="default"
[ 66.410274] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 66.410285] apm: overridden by ACPI.
[ 119.896985] Marking TSC unstable due to: cpufreq changes.
[ 119.902970] Time: acpi_pm clocksource has been installed.
[ 168.448219] Clocksource tsc unstable (delta = -261773232 ns)
[ 170.605583] eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
[ 68.409546] Bluetooth: Core ver 2.11
[ 68.410979] NET: Registered protocol family 31
[ 68.410988] Bluetooth: HCI device and connection manager initialized
[ 68.410995] Bluetooth: HCI socket layer initialized
[ 68.437968] Bluetooth: L2CAP ver 2.9
[ 68.437978] Bluetooth: L2CAP socket layer initialized
[ 68.517954] Bluetooth: RFCOMM socket layer initialized
[ 68.517989] Bluetooth: RFCOMM TTY layer initialized
[ 68.517992] Bluetooth: RFCOMM ver 1.8
[ 70.811022] NET: Registered protocol family 17
[ 71.359100] [drm] Initialized drm 1.1.0 20060810
[ 71.370973] PCI: Found IRQ 11 for device 0000:01:00.0
[ 71.370990] PCI: Sharing IRQ 11 with 0000:00:10.0
[ 71.371002] PCI: Sharing IRQ 11 with 0000:00:12.0
[ 71.371219] [drm] Initialized savage 2.4.1 20050313 on minor 0
[ 71.372362] mtrr: base(0xaa000000) is not aligned on a
size(0x5000000) boundary
[ 71.372902] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 71.372923] agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
[ 71.372978] agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
[ 184.224280] NET: Registered protocol family 10
[ 184.225715] lo: Disabled Privacy Extensions
[ 184.229741] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 197.778288] eth0: no IPv6 routers present
should show any boot up activity relevant to the card
-- Don't ask me to find this out!
I'm out of depth.
Will try to plug the card after the boot and let you know what happens.
Thnks.
M
_______________________________________________
Peterboro mailing list
[email protected]
https://mailman.lug.org.uk/mailman/listinfo/peterboro
