I should also add that the code executes without this error when using 1 processor...but then displays the error when running in parallel with more than one process.
Tim Stitt wrote: > Hi all, > > Can anyone suggest ways of overcoming the following pivot error I keep > receiving in my PETSc code during a KSPSolve(). > > [1]PETSC ERROR: Detected zero pivot in LU factorization > see > http://www.mcs.anl.gov/petsc/petsc-as/documentation/troubleshooting.html#ZeroPivot! > > > [1]PETSC ERROR: Zero pivot row 1801 value 0.00102826 tolerance > 0.00165189 * rowsum 1.65189e+09! > > From checking the documentation....the error is in row 1801, which > means it is most likely not a matrix assembly issue? > > I tried the following prior to the solve with no luck either..... > > call KSPGetPC(ksp,pc,error) > call PCFactorSetShiftNonzero(pc,PETSC_DECIDE,error) > > Is there anything else I can try? > > Thanks, > > Tim. > -- Dr. Timothy Stitt <timothy_dot_stitt_at_ichec.ie> HPC Application Consultant - ICHEC (www.ichec.ie) Dublin Institute for Advanced Studies 5 Merrion Square - Dublin 2 - Ireland +353-1-6621333 (tel) / +353-1-6621477 (fax)
