Currently I don't have access to ifort to try. For one - its strange that c/c++ examples work - but not fortran - esp because all blas calls are from the same c/c++ PETSc code.
One thing you can try: cd src/ksp/ksp/examples/tutorials make ex2 make ex2f [if ex2 works and ex2f fails - edit makefile - and change target ex2f: from using FLINKER to CLINKER and see if it makes a difference] Satish On Thu, 3 Mar 2011, Alexander Grayver wrote: > Actually, I've added this flag after sending first message to mailing list > (sorry for inconveniences) because I though it could help, unfortunately it > didn't. > > The problem probably could be reproduced compiling petsc using > --with-clanguage=cxx and VC++ and then trying to run FORTRAN examples. > > On 03.03.2011 16:26, Satish Balay wrote: > > perhaps you can remove '--CXX_CXXFLAGS=-Gz' and retry. > > > > Satish > > > > On Thu, 3 Mar 2011, Alexander Grayver wrote: > > > > > I've sent them, thanks! > > > > > > I also must note that this is a problem for fortran examples only! Because > > > when I've done "make test" after building the situation was: > > > > > > mt at agrayver /cygdrive/d/dev/petsc-3.1-p7 > > > $ make PETSC_DIR=/cygdrive/d/dev/petsc-3.1-p7 PETSC_ARCH=cygwin-cxx-debug > > > test > > > Running test examples to verify correct installation > > > C/C++ example src/snes/examples/tutorials/ex19 run successfully with 1 MPI > > > process > > > C/C++ example src/snes/examples/tutorials/ex19 run successfully with 2 MPI > > > processes > > > --------------Error detected during compile or > > > link!----------------------- > > > See > > > http://www.mcs.anl.gov/petsc/petsc-2/documentation/troubleshooting.html > > > /cygdrive/d/dev/petsc-3.1-p7/bin/win32fe/win32fe ifort -c -MT -Z7 -fpp > > > -I/cygdrive/d/dev/petsc-3.1-p7/cygwin-cxx-debug/include > > > -I/cygdrive/d/dev/petsc-3.1-p7/include > > > -I/cygdrive/d/Dev/HPC_2008_SDK/Include > > > -I/cygdrive/d/dev/petsc-3.1-p7/cygwin-cxx-debug/include > > > -I/cygdrive/d/Dev/HPC_2008_SDK/Include -o ex5f.o ex5f.F > > > > > > /cygdrive/d/dev/petsc-3.1-p7/bin/win32fe/win32fe ifort -MT -Z7 -fpp -o > > > ex5f > > > ex5f.o -L/cygdrive/d/dev/petsc-3.1-p7/cygwin-cxx-debug/lib > > > -L/cygdrive/d/dev/petsc-3.1-p7/cygwin-cxx-debug/lib -lpetsc > > > -L/cygdrive/d/dev/petsc-3.1-p7/cygwin-cxx-debug/lib -lflapack -lfblas > > > /cygdrive/d/Dev/HPC_2008_SDK/Lib/amd64/msmpi.lib > > > /cygdrive/d/Dev/HPC_2008_SDK/Lib/amd64/msmpifec.lib Gdi32.lib User32.lib > > > Advapi32.lib Kernel32.lib Ws2_32.lib > > > > > > libpetsc.lib(fuser.o) : error LNK2019: unresolved external symbol > > > __imp_GetUserNameA referenced in function "int __cdecl > > > PetscGetUserName(char * > > > const,unsigned__int64)" (?PetscGetUserName@@YAHQEAD_K at Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_ReleaseDC referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct_p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_BitBlt referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_ExtFloodFill referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_SelectObject referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_CreateCompatibleBitmap referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_CreateCompatibleDC referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_GetDC referenced in function "int __cdecl > > > PetscDrawSetDoubleBuffer_Win32(struct _p_PetscDraw *)" > > > (?PetscDrawSetDoubleBuffer_Win32@@YAHPEAU_p_PetscDraw@@@Z) > > > libpetsc.lib(win32draw.o) : error LNK2019: unresolved external symbol > > > __imp_UpdateWindow referenced in function "int __cdecl > > > PetscDrawRectangle_Win32(struct _p_PetscDraw > > > *,double,double,double,double,int,int,int,int)" > > > (?PetscDrawRectangle_Win32@@YAHPEAU_p_PetscDraw@@NNNNHHHH at Z) > > > > > > On 03.03.2011 14:49, Satish Balay wrote: > > > > can you send the corresponding configure.log and make.log to > > > > petsc-maint at mcs.anl.gov? > > > > > > > > Satish > > > > > > > > On Thu, 3 Mar 2011, Alexander Grayver wrote: > > > > > > > > > Hello, > > > > > > > > > > I built PETSc-3.1 using VC++ 2008 and IFC 10.1 with the following > > > > > configuration line: > > > > > > > > > > ./config/configure.py --with-cc='win32fe cl' --with-fc='win32fe ifort' > > > > > --with-cxx='win32fe cl' --download-f-blas-lapack=1 > > > > > --with-precision=double > > > > > --with-scalar-type=complex --with-clanguage=cxx > > > > > --with-mpi-include="/cygdrive/d/Dev/HPC_2008_SDK/Include" > > > > > > > > > > > > > > > --with-mpi-lib=["/cygdrive/d/Dev/HPC_2008_SDK/Lib/amd64/msmpi.lib","/cygdrive/d/Dev/HPC_2008_SDK/Lib/amd64/msmpifec.lib"] > > > > > --useThreads=0 --with-shared=0 > > > > > > > > > > Note there is C++ as main language. > > > > > > > > > > Now, when I'm trying to build examples I always get similar errors: > > > > > > > > > > Error 2 error LNK2019: unresolved external symbol ZGESVD > > > > > referenced > > > > > in > > > > > function "int __cdecl KSPComputeExtremeSingularValues_GMRES(struct > > > > > _p_KSP > > > > > *,double *,double *)" > > > > > (?KSPComputeExtremeSingularValues_GMRES@@YAHPEAU_p_KSP@@PEAN1 at Z) > > > > > libpetsc.lib > > > > > Error 3 error LNK2019: unresolved external symbol ZGEEV > > > > > referenced > > > > > in > > > > > function "int __cdecl KSPComputeEigenvalues_GMRES(struct _p_KSP > > > > > *,int,double > > > > > *,double *,int *)" > > > > > (?KSPComputeEigenvalues_GMRES@@YAHPEAU_p_KSP@@HPEAN1PEAH at Z) > > > > > libpetsc.lib > > > > > Error 4 error LNK2001: unresolved external symbol ZGEEV > > > > > libpetsc.lib > > > > > Error 5 error LNK2019: unresolved external symbol DZNRM2 > > > > > referenced > > > > > in > > > > > function "int __cdecl VecNorm_MPI(struct _p_Vec *,enum NormType,double > > > > > *)" > > > > > (?VecNorm_MPI@@YAHPEAU_p_Vec@@W4NormType@@PEAN at Z) libpetsc.lib > > > > > Error 6 error LNK2001: unresolved external symbol DZNRM2 > > > > > libpetsc.lib > > > > > Error 7 error LNK2019: unresolved external symbol DZASUM > > > > > referenced > > > > > in > > > > > function "int __cdecl VecNorm_Seq(struct _p_Vec *,enum NormType,double > > > > > *)" > > > > > (?VecNorm_Seq@@YAHPEAU_p_Vec@@W4NormType@@PEAN at Z) libpetsc.lib > > > > > ... > > > > > > > > > > It look like calling conventions are in disagreement. Any ideas? May > > > > > be I > > > > > should specify conventions myself in configuration line? If so, how to > > > > > do > > > > > that? > > > > > > > > > >
