On Thu, May 9, 2013 at 7:23 AM, Matthew Knepley <knepley at gmail.com> wrote:
> On Thu, May 9, 2013 at 7:01 AM, Dharmendar Reddy <dharmareddy84 at > gmail.com>wrote: > >> Hello, >> I know I can use DMPlexCreateSection with numBC=0, i was >> wondering if you can provide FORTRAN binding to DMPlexCreateSectionInitial. >> >> My thinking for the above is as follows: >> A section is not always related to a problem with boundary conditions. I >> just need to lay out some variables for access >> > > I was not planning on exposing that even for C. For simple layouts, I > think its better just to use PetscSection directly. > > Ok. > Matt > > >> >> Thanks >> Reddy >> >> >> >> >> -- >> ----------------------------------------------------- >> Dharmendar Reddy Palle >> Graduate Student >> Microelectronics Research center, >> University of Texas at Austin, >> 10100 Burnet Road, Bldg. 160 >> MER 2.608F, TX 78758-4445 >> e-mail: dharmareddy84 at gmail.com >> Phone: +1-512-350-9082 >> United States of America. >> Homepage: https://webspace.utexas.edu/~dpr342 >> > > > > -- > What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > -- Norbert Wiener > -- ----------------------------------------------------- Dharmendar Reddy Palle Graduate Student Microelectronics Research center, University of Texas at Austin, 10100 Burnet Road, Bldg. 160 MER 2.608F, TX 78758-4445 e-mail: dharmareddy84 at gmail.com Phone: +1-512-350-9082 United States of America. Homepage: https://webspace.utexas.edu/~dpr342 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.mcs.anl.gov/pipermail/petsc-users/attachments/20130509/2c6da464/attachment.html>
