As Barry said, this is a bit small but the performance looks reasonable. The solver does very badly, mathematically. I would try hypre to get another data point. You could also try 'cg' to check that the pipelined version is not a problem. Mark
On Fri, Apr 12, 2024 at 3:54 PM Barry Smith <bsm...@petsc.dev> wrote: > 800k is a pretty small problem for GPUs. We would need to see the runs > with output from -ksp_view -log_view to see if the timing results are > reasonable. On Apr 12, 2024, at 1: 48 PM, Ng, Cho-Kuen <cho@ slac. > stanford. edu> wrote: I performed > ZjQcmQRYFpfptBannerStart > This Message Is From an External Sender > This message came from outside your organization. > > ZjQcmQRYFpfptBannerEnd > > 800k is a pretty small problem for GPUs. > > We would need to see the runs with output from -ksp_view -log_view to > see if the timing results are reasonable. > > On Apr 12, 2024, at 1:48 PM, Ng, Cho-Kuen <c...@slac.stanford.edu> wrote: > > I performed tests on comparison using KSP with and without cuda backend on > NERSC's Perlmutter. For a finite element solve with 800k degrees of > freedom, the best times obtained using MPI and MPI+GPU were > > o MPI - 128 MPI tasks, 27 s > > o MPI+GPU - 4 MPI tasks, 4 GPU's, 32 s > > Is that the performance one would expect using the hybrid mode of > computation. Attached image shows the scaling on a single node. > > Thanks, > Cho > ------------------------------ > *From:* Ng, Cho-Kuen <c...@slac.stanford.edu> > *Sent:* Saturday, August 12, 2023 8:08 AM > *To:* Jacob Faibussowitsch <jacob....@gmail.com> > *Cc:* Barry Smith <bsm...@petsc.dev>; petsc-users <petsc-users@mcs.anl.gov > > > *Subject:* Re: [petsc-users] Using PETSc GPU backend > > Thanks Jacob. > ------------------------------ > *From:* Jacob Faibussowitsch <jacob....@gmail.com> > *Sent:* Saturday, August 12, 2023 5:02 AM > *To:* Ng, Cho-Kuen <c...@slac.stanford.edu> > *Cc:* Barry Smith <bsm...@petsc.dev>; petsc-users <petsc-users@mcs.anl.gov > > > *Subject:* Re: [petsc-users] Using PETSc GPU backend > > > Can petsc show the number of GPUs used? > > -device_view > > Best regards, > > Jacob Faibussowitsch > (Jacob Fai - booss - oh - vitch) > > > On Aug 12, 2023, at 00:53, Ng, Cho-Kuen via petsc-users < > petsc-users@mcs.anl.gov> wrote: > > > > Barry, > > > > I tried again today on Perlmutter and running on multiple GPU nodes > worked. Likely, I had messed up something the other day. Also, I was able > to have multiple MPI tasks on a GPU using Nvidia MPS. The petsc output > shows the number of MPI tasks: > > > > KSP Object: 32 MPI processes > > > > Can petsc show the number of GPUs used? > > > > Thanks, > > Cho > > > > From: Barry Smith <bsm...@petsc.dev> > > Sent: Wednesday, August 9, 2023 4:09 PM > > To: Ng, Cho-Kuen <c...@slac.stanford.edu> > > Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > > Subject: Re: [petsc-users] Using PETSc GPU backend > > > > We would need more information about "hanging". Do PETSc examples and > tiny problems "hang" on multiple nodes? If you run with -info what are the > last messages printed? Can you run with a debugger to see where it is > "hanging"? > > > > > > > >> On Aug 9, 2023, at 5:59 PM, Ng, Cho-Kuen <c...@slac.stanford.edu> wrote: > >> > >> Barry and Matt, > >> > >> Thanks for your help. Now I can use petsc GPU backend on Perlmutter: 1 > node, 4 MPI tasks and 4 GPUs. However, I ran into problems with multiple > nodes: 2 nodes, 8 MPI tasks and 8 GPUs. The run hung on KSPSolve. How can I > fix this? > >> > >> Best, > >> Cho > >> > >> From: Barry Smith <bsm...@petsc.dev> > >> Sent: Monday, July 17, 2023 6:58 AM > >> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >> Subject: Re: [petsc-users] Using PETSc GPU backend > >> > >> The examples that use DM, in particular DMDA all trivially support > using the GPU with -dm_mat_type aijcusparse -dm_vec_type cuda > >> > >> > >> > >>> On Jul 17, 2023, at 1:45 AM, Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>> > >>> Barry, > >>> > >>> Thank you so much for the clarification. > >>> > >>> I see that ex104.c and ex300.c use MatXAIJSetPreallocation(). Are > there other tutorials available? > >>> > >>> Cho > >>> From: Barry Smith <bsm...@petsc.dev> > >>> Sent: Saturday, July 15, 2023 8:36 AM > >>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>> > >>> Cho, > >>> > >>> We currently have a crappy API for turning on GPU support, and our > documentation is misleading in places. > >>> > >>> People constantly say "to use GPU's with PETSc you only need to > use -mat_type aijcusparse (for example)" This is incorrect. > >>> > >>> This does not work with code that uses the convenience Mat > constructors such as MatCreateAIJ(), MatCreateAIJWithArrays etc. It only > works if you use the constructor approach of MatCreate(), MatSetSizes(), > MatSetFromOptions(), MatXXXSetPreallocation(). ... Similarly you need to > use VecCreate(), VecSetSizes(), VecSetFromOptions() and -vec_type cuda > >>> > >>> If you use DM to create the matrices and vectors then you can use > -dm_mat_type aijcusparse -dm_vec_type cuda > >>> > >>> Sorry for the confusion. > >>> > >>> Barry > >>> > >>> > >>> > >>> > >>>> On Jul 15, 2023, at 8:03 AM, Matthew Knepley <knep...@gmail.com> > wrote: > >>>> > >>>> On Sat, Jul 15, 2023 at 1:44 AM Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>>> Matt, > >>>> > >>>> After inserting 2 lines in the code: > >>>> > >>>> ierr = > MatCreate(PETSC_COMM_WORLD,&A);CHKERRQ(ierr); > >>>> ierr = MatSetFromOptions(A);CHKERRQ(ierr); > >>>> ierr = MatCreateAIJ(PETSC_COMM_WORLD,mlocal,mlocal,m,n, > >>>> > d_nz,PETSC_NULL,o_nz,PETSC_NULL,&A);;CHKERRQ(ierr); > >>>> > >>>> "There are no unused options." However, there is no improvement on > the GPU performance. > >>>> > >>>> 1. MatCreateAIJ() sets the type, and in fact it overwrites the Mat > you created in steps 1 and 2. This is detailed in the manual. > >>>> > >>>> 2. You should replace MatCreateAIJ(), with MatSetSizes() before > MatSetFromOptions(). > >>>> > >>>> THanks, > >>>> > >>>> Matt > >>>> Thanks, > >>>> Cho > >>>> > >>>> From: Matthew Knepley <knep...@gmail.com> > >>>> Sent: Friday, July 14, 2023 5:57 PM > >>>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>> Cc: Barry Smith <bsm...@petsc.dev>; Mark Adams <mfad...@lbl.gov>; > petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> On Fri, Jul 14, 2023 at 7:57 PM Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>>> I managed to pass the following options to PETSc using a GPU node on > Perlmutter. > >>>> > >>>> -mat_type aijcusparse -vec_type cuda -log_view -options_left > >>>> > >>>> Below is a summary of the test using 4 MPI tasks and 1 GPU per task. > >>>> > >>>> o #PETSc Option Table entries: > >>>> -log_view > >>>> -mat_type aijcusparse > >>>> -options_left > >>>> -vec_type cuda > >>>> #End of PETSc Option Table entries > >>>> WARNING! There are options you set that were not used! > >>>> WARNING! could be spelling mistake, etc! > >>>> There is one unused database option. It is: > >>>> Option left: name:-mat_type value: aijcusparse > >>>> > >>>> The -mat_type option has not been used. In the application code, we > use > >>>> > >>>> ierr = MatCreateAIJ(PETSC_COMM_WORLD,mlocal,mlocal,m,n, > >>>> d_nz,PETSC_NULL,o_nz,PETSC_NULL,&A);;CHKERRQ(ierr); > >>>> > >>>> > >>>> If you create the Mat this way, then you need MatSetFromOptions() in > order to set the type from the command line. > >>>> > >>>> Thanks, > >>>> > >>>> Matt > >>>> o The percent flops on the GPU for KSPSolve is 17%. > >>>> > >>>> In comparison with a CPU run using 16 MPI tasks, the GPU run is an > order of magnitude slower. How can I improve the GPU performance? > >>>> > >>>> Thanks, > >>>> Cho > >>>> From: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>> Sent: Friday, June 30, 2023 7:57 AM > >>>> To: Barry Smith <bsm...@petsc.dev>; Mark Adams <mfad...@lbl.gov> > >>>> Cc: Matthew Knepley <knep...@gmail.com>; petsc-users@mcs.anl.gov < > petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> Barry, Mark and Matt, > >>>> > >>>> Thank you all for the suggestions. I will modify the code so we can > pass runtime options. > >>>> > >>>> Cho > >>>> From: Barry Smith <bsm...@petsc.dev> > >>>> Sent: Friday, June 30, 2023 7:01 AM > >>>> To: Mark Adams <mfad...@lbl.gov> > >>>> Cc: Matthew Knepley <knep...@gmail.com>; Ng, Cho-Kuen < > c...@slac.stanford.edu>; petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> > >>>> Note that options like -mat_type aijcusparse -vec_type cuda only > work if the program is set up to allow runtime swapping of matrix and > vector types. If you have a call to MatCreateMPIAIJ() or other specific > types then then these options do nothing but because Mark had you use > -options_left the program will tell you at the end that it did not use the > option so you will know. > >>>> > >>>>> On Jun 30, 2023, at 9:30 AM, Mark Adams <mfad...@lbl.gov> wrote: > >>>>> > >>>>> PetscCall(PetscInitialize(&argc, &argv, NULL, help)); gives us the > args and you run: > >>>>> > >>>>> a.out -mat_type aijcusparse -vec_type cuda -log_view -options_left > >>>>> > >>>>> Mark > >>>>> > >>>>> On Fri, Jun 30, 2023 at 6:16 AM Matthew Knepley <knep...@gmail.com> > wrote: > >>>>> On Fri, Jun 30, 2023 at 1:13 AM Ng, Cho-Kuen via petsc-users < > petsc-users@mcs.anl.gov> wrote: > >>>>> Mark, > >>>>> > >>>>> The application code reads in parameters from an input file, where > we can put the PETSc runtime options. Then we pass the options to > PetscInitialize(...). Does that sounds right? > >>>>> > >>>>> PETSc will read command line argument automatically in > PetscInitialize() unless you shut it off. > >>>>> > >>>>> Thanks, > >>>>> > >>>>> Matt > >>>>> Cho > >>>>> From: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>>> Sent: Thursday, June 29, 2023 8:32 PM > >>>>> To: Mark Adams <mfad...@lbl.gov> > >>>>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>>> Mark, > >>>>> > >>>>> Thanks for the information. How do I put the runtime options for the > executable, say, a.out, which does not have the provision to append > arguments? Do I need to change the C++ main to read in the options? > >>>>> > >>>>> Cho > >>>>> From: Mark Adams <mfad...@lbl.gov> > >>>>> Sent: Thursday, June 29, 2023 5:55 PM > >>>>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>>> Run with options: -mat_type aijcusparse -vec_type cuda -log_view > -options_left > >>>>> The last column of the performance data (from -log_view) will be the > percent flops on the GPU. Check that that is > 0. > >>>>> > >>>>> The end of the output will list the options that were used and > options that were _not_ used (if any). Check that there are no options left. > >>>>> > >>>>> Mark > >>>>> > >>>>> On Thu, Jun 29, 2023 at 7:50 PM Ng, Cho-Kuen via petsc-users < > petsc-users@mcs.anl.gov> wrote: > >>>>> I installed PETSc on Perlmutter using "spack install > petsc+cuda+zoltan" and used it by "spack load petsc/fwge6pf". Then I > compiled the application code (purely CPU code) linking to the petsc > package, hoping that I can get performance improvement using the petsc GPU > backend. However, the timing was the same using the same number of MPI > tasks with and without GPU accelerators. Have I missed something in the > process, for example, setting up PETSc options at runtime to use the GPU > backend? > >>>>> > >>>>> Thanks, > >>>>> Cho > >>>>> > >>>>> > >>>>> -- > >>>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>>> -- Norbert Wiener > >>>>> > >>>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > >>>> > >>>> > >>>> > >>>> -- > >>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>> -- Norbert Wiener > >>>> > >>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > >>>> > >>>> > >>>> -- > >>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>> -- Norbert Wiener > >>>> > >>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > >> > >> > >> > >> From: Barry Smith <bsm...@petsc.dev> > >> Sent: Monday, July 17, 2023 6:58 AM > >> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >> Subject: Re: [petsc-users] Using PETSc GPU backend > >> > >> The examples that use DM, in particular DMDA all trivially support > using the GPU with -dm_mat_type aijcusparse -dm_vec_type cuda > >> > >> > >> > >>> On Jul 17, 2023, at 1:45 AM, Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>> > >>> Barry, > >>> > >>> Thank you so much for the clarification. > >>> > >>> I see that ex104.c and ex300.c use MatXAIJSetPreallocation(). Are > there other tutorials available? > >>> > >>> Cho > >>> From: Barry Smith <bsm...@petsc.dev> > >>> Sent: Saturday, July 15, 2023 8:36 AM > >>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>> > >>> Cho, > >>> > >>> We currently have a crappy API for turning on GPU support, and our > documentation is misleading in places. > >>> > >>> People constantly say "to use GPU's with PETSc you only need to > use -mat_type aijcusparse (for example)" This is incorrect. > >>> > >>> This does not work with code that uses the convenience Mat > constructors such as MatCreateAIJ(), MatCreateAIJWithArrays etc. It only > works if you use the constructor approach of MatCreate(), MatSetSizes(), > MatSetFromOptions(), MatXXXSetPreallocation(). ... Similarly you need to > use VecCreate(), VecSetSizes(), VecSetFromOptions() and -vec_type cuda > >>> > >>> If you use DM to create the matrices and vectors then you can use > -dm_mat_type aijcusparse -dm_vec_type cuda > >>> > >>> Sorry for the confusion. > >>> > >>> Barry > >>> > >>> > >>> > >>> > >>>> On Jul 15, 2023, at 8:03 AM, Matthew Knepley <knep...@gmail.com> > wrote: > >>>> > >>>> On Sat, Jul 15, 2023 at 1:44 AM Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>>> Matt, > >>>> > >>>> After inserting 2 lines in the code: > >>>> > >>>> ierr = > MatCreate(PETSC_COMM_WORLD,&A);CHKERRQ(ierr); > >>>> ierr = MatSetFromOptions(A);CHKERRQ(ierr); > >>>> ierr = MatCreateAIJ(PETSC_COMM_WORLD,mlocal,mlocal,m,n, > >>>> > d_nz,PETSC_NULL,o_nz,PETSC_NULL,&A);;CHKERRQ(ierr); > >>>> > >>>> "There are no unused options." However, there is no improvement on > the GPU performance. > >>>> > >>>> 1. MatCreateAIJ() sets the type, and in fact it overwrites the Mat > you created in steps 1 and 2. This is detailed in the manual. > >>>> > >>>> 2. You should replace MatCreateAIJ(), with MatSetSizes() before > MatSetFromOptions(). > >>>> > >>>> THanks, > >>>> > >>>> Matt > >>>> Thanks, > >>>> Cho > >>>> > >>>> From: Matthew Knepley <knep...@gmail.com> > >>>> Sent: Friday, July 14, 2023 5:57 PM > >>>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>> Cc: Barry Smith <bsm...@petsc.dev>; Mark Adams <mfad...@lbl.gov>; > petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> On Fri, Jul 14, 2023 at 7:57 PM Ng, Cho-Kuen <c...@slac.stanford.edu> > wrote: > >>>> I managed to pass the following options to PETSc using a GPU node on > Perlmutter. > >>>> > >>>> -mat_type aijcusparse -vec_type cuda -log_view -options_left > >>>> > >>>> Below is a summary of the test using 4 MPI tasks and 1 GPU per task. > >>>> > >>>> o #PETSc Option Table entries: > >>>> -log_view > >>>> -mat_type aijcusparse > >>>> -options_left > >>>> -vec_type cuda > >>>> #End of PETSc Option Table entries > >>>> WARNING! There are options you set that were not used! > >>>> WARNING! could be spelling mistake, etc! > >>>> There is one unused database option. It is: > >>>> Option left: name:-mat_type value: aijcusparse > >>>> > >>>> The -mat_type option has not been used. In the application code, we > use > >>>> > >>>> ierr = MatCreateAIJ(PETSC_COMM_WORLD,mlocal,mlocal,m,n, > >>>> d_nz,PETSC_NULL,o_nz,PETSC_NULL,&A);;CHKERRQ(ierr); > >>>> > >>>> > >>>> If you create the Mat this way, then you need MatSetFromOptions() in > order to set the type from the command line. > >>>> > >>>> Thanks, > >>>> > >>>> Matt > >>>> o The percent flops on the GPU for KSPSolve is 17%. > >>>> > >>>> In comparison with a CPU run using 16 MPI tasks, the GPU run is an > order of magnitude slower. How can I improve the GPU performance? > >>>> > >>>> Thanks, > >>>> Cho > >>>> From: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>> Sent: Friday, June 30, 2023 7:57 AM > >>>> To: Barry Smith <bsm...@petsc.dev>; Mark Adams <mfad...@lbl.gov> > >>>> Cc: Matthew Knepley <knep...@gmail.com>; petsc-users@mcs.anl.gov < > petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> Barry, Mark and Matt, > >>>> > >>>> Thank you all for the suggestions. I will modify the code so we can > pass runtime options. > >>>> > >>>> Cho > >>>> From: Barry Smith <bsm...@petsc.dev> > >>>> Sent: Friday, June 30, 2023 7:01 AM > >>>> To: Mark Adams <mfad...@lbl.gov> > >>>> Cc: Matthew Knepley <knep...@gmail.com>; Ng, Cho-Kuen < > c...@slac.stanford.edu>; petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>> > >>>> Note that options like -mat_type aijcusparse -vec_type cuda only > work if the program is set up to allow runtime swapping of matrix and > vector types. If you have a call to MatCreateMPIAIJ() or other specific > types then then these options do nothing but because Mark had you use > -options_left the program will tell you at the end that it did not use the > option so you will know. > >>>> > >>>>> On Jun 30, 2023, at 9:30 AM, Mark Adams <mfad...@lbl.gov> wrote: > >>>>> > >>>>> PetscCall(PetscInitialize(&argc, &argv, NULL, help)); gives us the > args and you run: > >>>>> > >>>>> a.out -mat_type aijcusparse -vec_type cuda -log_view -options_left > >>>>> > >>>>> Mark > >>>>> > >>>>> On Fri, Jun 30, 2023 at 6:16 AM Matthew Knepley <knep...@gmail.com> > wrote: > >>>>> On Fri, Jun 30, 2023 at 1:13 AM Ng, Cho-Kuen via petsc-users < > petsc-users@mcs.anl.gov> wrote: > >>>>> Mark, > >>>>> > >>>>> The application code reads in parameters from an input file, where > we can put the PETSc runtime options. Then we pass the options to > PetscInitialize(...). Does that sounds right? > >>>>> > >>>>> PETSc will read command line argument automatically in > PetscInitialize() unless you shut it off. > >>>>> > >>>>> Thanks, > >>>>> > >>>>> Matt > >>>>> Cho > >>>>> From: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>>> Sent: Thursday, June 29, 2023 8:32 PM > >>>>> To: Mark Adams <mfad...@lbl.gov> > >>>>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>>> Mark, > >>>>> > >>>>> Thanks for the information. How do I put the runtime options for the > executable, say, a.out, which does not have the provision to append > arguments? Do I need to change the C++ main to read in the options? > >>>>> > >>>>> Cho > >>>>> From: Mark Adams <mfad...@lbl.gov> > >>>>> Sent: Thursday, June 29, 2023 5:55 PM > >>>>> To: Ng, Cho-Kuen <c...@slac.stanford.edu> > >>>>> Cc: petsc-users@mcs.anl.gov <petsc-users@mcs.anl.gov> > >>>>> Subject: Re: [petsc-users] Using PETSc GPU backend > >>>>> Run with options: -mat_type aijcusparse -vec_type cuda -log_view > -options_left > >>>>> The last column of the performance data (from -log_view) will be the > percent flops on the GPU. Check that that is > 0. > >>>>> > >>>>> The end of the output will list the options that were used and > options that were _not_ used (if any). Check that there are no options left. > >>>>> > >>>>> Mark > >>>>> > >>>>> On Thu, Jun 29, 2023 at 7:50 PM Ng, Cho-Kuen via petsc-users < > petsc-users@mcs.anl.gov> wrote: > >>>>> I installed PETSc on Perlmutter using "spack install > petsc+cuda+zoltan" and used it by "spack load petsc/fwge6pf". Then I > compiled the application code (purely CPU code) linking to the petsc > package, hoping that I can get performance improvement using the petsc GPU > backend. However, the timing was the same using the same number of MPI > tasks with and without GPU accelerators. Have I missed something in the > process, for example, setting up PETSc options at runtime to use the GPU > backend? > >>>>> > >>>>> Thanks, > >>>>> Cho > >>>>> > >>>>> > >>>>> -- > >>>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>>> -- Norbert Wiener > >>>>> > >>>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > >>>> > >>>> > >>>> > >>>> -- > >>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>> -- Norbert Wiener > >>>> > >>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > >>>> > >>>> > >>>> -- > >>>> What most experimenters take for granted before they begin their > experiments is infinitely more interesting than any results to which their > experiments lead. > >>>> -- Norbert Wiener > >>>> > >>>> https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!YNQ2XFZlhyUlipu4sdOKV4traakP3Yhdqce8KX11c4MZKm3JThQeNGFVD4i2Zk6R3nw_eSkR6JMwKAAuEYglCXg$ > >>>> > <https://urldefense.us/v3/__https://www.cse.buffalo.edu/*knepley/__;fg!!G_uCfscf7eWS!fMikK_wvRIVkv5jLV6EHt_rPhWLibqlxAAYjRVMbAEGOUp417LWCH59TvzCtcD3j4dOd4xR_tUy2MRnqU1N7kew$> > > > <Untitled.png> > > >