Whoa, wait a minute, I wasn't attempting to insult anyone, why did you reply like that? I was just offering a solution I thought may help, and I posted it to this list so if I was wrong someone could say so, but I wasn't trying to say I am the authority on it or anything otherwise I would not have put in "I believe". I mean gimme a break dude, I didn't think anyone would be offended by my post, otherwise I wouldn't have posted it.
Amir Seyavash Mesry [EMAIL PROTECTED] LSI Logic Corporation http://www.lsilogic.com/ Raid Support Test Technician 6145-D Northbelt Parkway Norcross, GA 30071 678-728-1211 NOTICE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe that you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this communication in error, and delete the copy you received. Thank you. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Henning Brauer Sent: Thursday, September 04, 2003 7:12 PM To: [EMAIL PROTECTED] Subject: Re: OpenBSD3.3 PF dhcp dhcrelay vlans thanks for proving that you don't understand what you are doing. "my dick is bigger than yours" doesn't work when modifying memory aloocation affecting shitz in kernel land. On Thu, Sep 04, 2003 at 12:24:03PM -0400, Amir Seyavash Mesry wrote: > I believe that can be done with the UKC on a live system as well, or > with the Kernel Conf file. I recompile mine to 32768 normally > > Amir Seyavash Mesry > [EMAIL PROTECTED] > LSI Logic Corporation > http://www.lsilogic.com/ > Raid Support Test Technician > 6145-D Northbelt Parkway > Norcross, GA 30071 > 678-728-1211 > > NOTICE: This communication may contain privileged or other > confidential information. If you are not the intended recipient, or > believe that you have received this communication in error, please do > not print, copy, retransmit, disseminate, or otherwise use the > information. Also, please indicate to the sender that you have > received this communication in error, and delete the copy you > received. Thank you. > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Shawn Kohrman > Sent: Thursday, September 04, 2003 11:12 AM > To: [EMAIL PROTECTED] > Subject: OpenBSD3.3 PF dhcp dhcrelay vlans > > > Some lessons learned for those out there who are running PF in some > high traffic implementations. > > dhcrelay > The dhcrelay that ships with OpenBSD 3.3 seems to be broken. I > installed the one that is part of the ISC port, and it worked fine. > > vlans > My PF box is setup with about 2500 machines behind it. I use 10 vlans > with a Cisco Catalyst switch. I found it necessary to increase > NMBCLUSTERS in param.h from 2048 to 16384 to adequately handle the > load. > > > Shawn Kohrman > Network/Security Administrator > Azusa Pacific University > 901 E. Alosta Ave. > Azusa, CA 91702 > http://www.apu.edu/ > > > > -- Henning Brauer, BS Web Services, http://bsws.de [EMAIL PROTECTED] - [EMAIL PROTECTED] Unix is very simple, but it takes a genius to understand the simplicity. (Dennis Ritchie)