On Fri, Apr 17, 2015 at 7:16 PM, Mehmet Emin KARAKAŞ <emin...@gmail.com> wrote:
> Hi Sanket, > > I test the patch on windows7 and Ubuntu 14.10. It's working fine. > Thanks for the patch. I have committed this in the master branch. Also, thanks to Akshay Joshi, Sanket Mehta for the review and improvisation of the patch. I have modified a bit before check-in. -- Thanks & Regards, Ashesh Vashi EnterpriseDB INDIA: Enterprise PostgreSQL Company <http://www.enterprisedb.com> *http://www.linkedin.com/in/asheshvashi* <http://www.linkedin.com/in/asheshvashi> > > 2015-04-17 12:54 GMT+03:00 Sanket Mehta <sanket.me...@enterprisedb.com>: > >> Hi Mehmet, >> >> I have modified the patch as explained below: >> >> After carefully reviewing the patch, we found that there is a memory leak >> while error file handling. >> >> after opening the file in write mode using freopen(), we again open the >> same file in read mode using fopen(). >> at this time we are just opening a file without any stderr stream getting >> redirected. So it should be closed after read operation. >> Which was not happening before and its a memory leak. >> >> previously we were using the same FILE* which is used in freopen() for >> opening the file using fopen(), so when we close the handler internally it >> may have close the stream and thus we were not getting the std error for >> the 2nd time. >> >> But now I have used another FILE* handler to open that file in read mode >> using fopen() and closed it after read operation and it works fine. >> Errors are getting logged in table every time properly. >> >> Another change is that we std errors should get logged in file every time >> irrespective of output string is empty or not. so I have removed the >> condition if(output == wxEmptyString) . >> >> I have attached the new patch here. >> Please test and let me know if you think any changes requires. >> >> >> Regards, >> Sanket Mehta >> Sr Software engineer >> Enterprisedb >> >> On Wed, Apr 15, 2015 at 6:23 PM, Sanket Mehta < >> sanket.me...@enterprisedb.com> wrote: >> >>> Hi, >>> >>> I have reviewed the patch. >>> You are right Mehmet, previously 2nd time stderr was not coming to file. >>> With this patch that issue is resolved. >>> >>> >>> >>> Regards, >>> Sanket Mehta >>> Sr Software engineer >>> Enterprisedb >>> >>> On Wed, Apr 15, 2015 at 3:27 PM, Mehmet Emin KARAKAŞ <emin...@gmail.com> >>> wrote: >>> >>>> Hi, >>>> >>>> >>>> We are using the patch. But We make a mistake. Pgagent run the agent >>>> first time, everything is perfect. But second batch run , pgagent is not >>>> get stderr message. Then I have reviewed the patch. we are using "freopen" >>>> for redirect stderr massage to file. Then we close the error file. But If >>>> close the file, close the stderr message at the same time and I don't any >>>> error message form stderror. So, I remove the fclose code for errorfile. >>>> Now Every things is ok. >>>> I make to test it on windows 7 and ubuntu 14.10. It is working fine. I >>>> attached the patch in this mail. >>>> >>>> 2015-04-09 10:00 GMT+03:00 Sanket Mehta <sanket.me...@enterprisedb.com> >>>> : >>>> >>>>> Hi, >>>>> >>>>> I have reviewed the patch. >>>>> It is working fine. >>>>> >>>>> Regards, >>>>> Sanket Mehta >>>>> Sr Software engineer >>>>> Enterprisedb >>>>> >>>>> On Mon, Apr 6, 2015 at 7:30 PM, Mehmet Emin KARAKAŞ <emin...@gmail.com >>>>> > wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> What is the last situation? I want to remove my repo and continue >>>>>> original repo. >>>>>> >>>>>> Thanks for everything. >>>>>> >>>>>> >>>>>> 2015-03-23 10:58 GMT+02:00 Ashesh Vashi < >>>>>> ashesh.va...@enterprisedb.com>: >>>>>> >>>>>>> On Mon, Mar 23, 2015 at 2:26 PM, Mehmet Emin KARAKAŞ < >>>>>>> emin...@gmail.com> wrote: >>>>>>> >>>>>>>> I send the diff in previous mail. The name >>>>>>>> batch_cron_error_20150323.patch. You need to something diffrent. I >>>>>>>> don't >>>>>>>> understand. >>>>>>>> >>>>>>>> Oops. >>>>>>> I missed that. >>>>>>> >>>>>>> When I saw the job.cpp, I thought - you sent the whole files only. >>>>>>> Thanks for the patch. >>>>>>> >>>>>>> Sanket, >>>>>>> >>>>>>> Can you please review the patch? >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Thanks & Regards, >>>>>>> >>>>>>> Ashesh Vashi >>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>> <http://www.enterprisedb.com> >>>>>>> >>>>>>> >>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2015-03-23 10:36 GMT+02:00 Ashesh Vashi < >>>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>>> >>>>>>>>> Thanks Mehmet. >>>>>>>>> Can you please send the diff (as a patch file) instead of the >>>>>>>>> whole file? >>>>>>>>> >>>>>>>>> -- >>>>>>>>> >>>>>>>>> Thanks & Regards, >>>>>>>>> >>>>>>>>> Ashesh Vashi >>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>> >>>>>>>>> >>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>> >>>>>>>>> On Mon, Mar 23, 2015 at 1:54 PM, Mehmet Emin KARAKAŞ < >>>>>>>>> emin...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Hi Ashesh, >>>>>>>>>> >>>>>>>>>> My test scenario is; >>>>>>>>>> >>>>>>>>>> "java -jar xxxx" command. >>>>>>>>>> >>>>>>>>>> xxx is not a file. I want to see a error message in pgadmin and >>>>>>>>>> pga_jobsteplog table. I am waiting to "Error: Unable to access >>>>>>>>>> jarfile >>>>>>>>>> xxxx" message in job log output. >>>>>>>>>> >>>>>>>>>> I make test the patch in windows 7 and ubuntu 14.10. In windows 7 >>>>>>>>>> not problem, perfect working. But nix system (Ubuntu 14.10) debug >>>>>>>>>> mode, I >>>>>>>>>> just saw the massage in terminal. Then I added to message error file >>>>>>>>>> to >>>>>>>>>> output variable. >>>>>>>>>> >>>>>>>>>> Now It's working perfect windows and nix systems. I attach the >>>>>>>>>> new patch in this message. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2015-03-23 1:15 GMT+02:00 Mehmet Emin KARAKAŞ <emin...@gmail.com> >>>>>>>>>> : >>>>>>>>>> >>>>>>>>>>> Hi Ashesh , >>>>>>>>>>> Sorry for late. I have test in today and share the results >>>>>>>>>>> >>>>>>>>>>> 2015-03-16 10:32 GMT+02:00 Ashesh Vashi < >>>>>>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>>>>>> >>>>>>>>>>>> On Mon, Mar 16, 2015 at 1:31 PM, Mehmet Emin KARAKAŞ < >>>>>>>>>>>> emin...@gmail.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hi, >>>>>>>>>>>>> >>>>>>>>>>>>> I have not tried the patch because last week was very run >>>>>>>>>>>>> down. But I will try the patch in this week and I will share >>>>>>>>>>>>> the result. >>>>>>>>>>>>> >>>>>>>>>>>> Thanks. >>>>>>>>>>>> I really appreciate. >>>>>>>>>>>> >>>>>>>>>>>> [NOTE: Please keep the list in loop...] >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>>>> Thanks & Regards, >>>>>>>>>>>> >>>>>>>>>>>> Ashesh Vashi >>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> 2015-03-16 6:16 GMT+02:00 Ashesh Vashi < >>>>>>>>>>>>> ashesh.va...@enterprisedb.com>: >>>>>>>>>>>>> >>>>>>>>>>>>>> HI Mehmet, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Do you have time to spend time for this? >>>>>>>>>>>>>> Can you please review, and test the patch sent by Akshay? >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks & Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> Ashesh Vashi >>>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Mar 5, 2015 at 3:07 PM, Akshay Joshi < >>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi Mehmet >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have added the logic in job.cpp file to read the error >>>>>>>>>>>>>>> message, If batch job is failed. Attached is the patch file >>>>>>>>>>>>>>> and job.cpp with the email. >>>>>>>>>>>>>>> I haven't tested it because facing some difficulty in >>>>>>>>>>>>>>> linking the project on Windows. Can you please apply the patch >>>>>>>>>>>>>>> and test it >>>>>>>>>>>>>>> at your end, also if you seen some modification please feel >>>>>>>>>>>>>>> free to do it. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:22 PM, Akshay Joshi < >>>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Sure. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:20 PM, Dave Page < >>>>>>>>>>>>>>>> dp...@pgadmin.org> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:48 AM, Akshay Joshi < >>>>>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Dave, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 4:11 PM, Dave Page < >>>>>>>>>>>>>>>>>> dp...@pgadmin.org> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Mehmet may not be able to work on Windows, so one of us >>>>>>>>>>>>>>>>>>> may have to deal with that. Did we not solve this already >>>>>>>>>>>>>>>>>>> in PEM btw? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Yes we have solved it in PEM, I have send the source >>>>>>>>>>>>>>>>>> code in my previous email. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Oh, that was it? Well that code is pretty well tried and >>>>>>>>>>>>>>>>> tested, so maybe we should just use that. Perhaps you can >>>>>>>>>>>>>>>>> send Mehmet a >>>>>>>>>>>>>>>>> patch to test on his build? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:16 AM, Akshay Joshi < >>>>>>>>>>>>>>>>>>> akshay.jo...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Hi Mehmet >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I have reviewed the patch, but it is only for nix >>>>>>>>>>>>>>>>>>>> machine. Can you please provide a patch where it should be >>>>>>>>>>>>>>>>>>>> fixed for >>>>>>>>>>>>>>>>>>>> Windows as well. I have implemented the same in one of my >>>>>>>>>>>>>>>>>>>> project using >>>>>>>>>>>>>>>>>>>> below logic which works for both windows and nix. You can >>>>>>>>>>>>>>>>>>>> tried out the >>>>>>>>>>>>>>>>>>>> below logic >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> errFile = 'xyz.txt'; >>>>>>>>>>>>>>>>>>>> FILE *fpError = freopen(errFile.mb_str(), "w", stderr); >>>>>>>>>>>>>>>>>>>> .... .... // If output is empty then either job did not >>>>>>>>>>>>>>>>>>>> return any output >>>>>>>>>>>>>>>>>>>> // or job threw some error into stderr. if (output == >>>>>>>>>>>>>>>>>>>> wxEmptyString) { // Check script threw some error into >>>>>>>>>>>>>>>>>>>> stderr if (fpError) { fclose(fpError); fpError = fopen( >>>>>>>>>>>>>>>>>>>> errFile.mb_str(), "r"); if (fpError) { char buffer >>>>>>>>>>>>>>>>>>>> [4098]; wxString errorMsg = wxEmptyString; while (!feof >>>>>>>>>>>>>>>>>>>> (fpError)) { if (fgets(buffer, 4096, fpError) != NULL) >>>>>>>>>>>>>>>>>>>> errorMsg += wxString(buffer, wxConvLibc); } fclose( >>>>>>>>>>>>>>>>>>>> fpError); } } } >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Mar 4, 2015 at 10:41 AM, Ashesh Vashi < >>>>>>>>>>>>>>>>>>>> ashesh.va...@enterprisedb.com> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Sure >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks & Regards, >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Ashesh Vashi >>>>>>>>>>>>>>>>>>>>> EnterpriseDB INDIA: Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>>>>> <http://www.enterprisedb.com> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> *http://www.linkedin.com/in/asheshvashi* >>>>>>>>>>>>>>>>>>>>> <http://www.linkedin.com/in/asheshvashi> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 2:01 PM, Dave Page < >>>>>>>>>>>>>>>>>>>>> dp...@pgadmin.org> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Ashesh; can you please get this reviewed and applied >>>>>>>>>>>>>>>>>>>>>> if it looks OK? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Tue, Mar 3, 2015 at 12:00 PM, Mehmet Emin KARAKAŞ < >>>>>>>>>>>>>>>>>>>>>> emin...@gmail.com> wrote: >>>>>>>>>>>>>>>>>>>>>> > Hi, >>>>>>>>>>>>>>>>>>>>>> > If batch cron is failed, pgagent doesn't receive >>>>>>>>>>>>>>>>>>>>>> error messages. We fix it. >>>>>>>>>>>>>>>>>>>>>> > We canalized the stderr to stdout. This patch batch >>>>>>>>>>>>>>>>>>>>>> cron receive error >>>>>>>>>>>>>>>>>>>>>> > massages from nix machine. Git Diff Message and >>>>>>>>>>>>>>>>>>>>>> job.cpp file is attached. >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > Thanks. >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > -- >>>>>>>>>>>>>>>>>>>>>> > MEHMET EMİN KARAKAŞ >>>>>>>>>>>>>>>>>>>>>> > Postgresql Global Username: emin100 >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > diff --git a/job.cpp b/job.cpp >>>>>>>>>>>>>>>>>>>>>> > index 00334ab..694be22 100644 >>>>>>>>>>>>>>>>>>>>>> > --- a/job.cpp >>>>>>>>>>>>>>>>>>>>>> > +++ b/job.cpp >>>>>>>>>>>>>>>>>>>>>> > @@ -273,8 +273,11 @@ int Job::Execute() >>>>>>>>>>>>>>>>>>>>>> > // The *nix way. >>>>>>>>>>>>>>>>>>>>>> > FILE *fp_script; >>>>>>>>>>>>>>>>>>>>>> > char buf[4098]; >>>>>>>>>>>>>>>>>>>>>> > + >>>>>>>>>>>>>>>>>>>>>> > + wxString wxSt = wxT(""); >>>>>>>>>>>>>>>>>>>>>> > + wxSt.Printf( _("%s 2>&1"), >>>>>>>>>>>>>>>>>>>>>> filename.c_str()); >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > - fp_script = >>>>>>>>>>>>>>>>>>>>>> > popen(filename.mb_str(wxConvUTF8), "r"); >>>>>>>>>>>>>>>>>>>>>> > + fp_script = >>>>>>>>>>>>>>>>>>>>>> popen(wxSt.mb_str(wxConvUTF8) , >>>>>>>>>>>>>>>>>>>>>> > "r"); >>>>>>>>>>>>>>>>>>>>>> > if (!fp_script) >>>>>>>>>>>>>>>>>>>>>> > { >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> output.Printf(_("Couldn't execute >>>>>>>>>>>>>>>>>>>>>> > script: %s, errno = %d"), filename.c_str(), errno); >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> > -- >>>>>>>>>>>>>>>>>>>>>> > Sent via pgadmin-hackers mailing list ( >>>>>>>>>>>>>>>>>>>>>> pgadmin-hackers@postgresql.org) >>>>>>>>>>>>>>>>>>>>>> > To make changes to your subscription: >>>>>>>>>>>>>>>>>>>>>> > http://www.postgresql.org/mailpref/pgadmin-hackers >>>>>>>>>>>>>>>>>>>>>> > >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Sent via pgadmin-hackers mailing list ( >>>>>>>>>>>>>>>>>>>>>> pgadmin-hackers@postgresql.org) >>>>>>>>>>>>>>>>>>>>>> To make changes to your subscription: >>>>>>>>>>>>>>>>>>>>>> http://www.postgresql.org/mailpref/pgadmin-hackers >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: >>>>>>>>>>>>>>>>>>>> +91 976-788-8246* >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: >>>>>>>>>>>>>>>>>> +91 976-788-8246* >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Dave Page >>>>>>>>>>>>>>>>> Blog: http://pgsnake.blogspot.com >>>>>>>>>>>>>>>>> Twitter: @pgsnake >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> EnterpriseDB UK: http://www.enterprisedb.com >>>>>>>>>>>>>>>>> The Enterprise PostgreSQL Company >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91 >>>>>>>>>>>>>>>> 976-788-8246* >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> *Akshay Joshi* >>>>>>>>>>>>>>> *Principal Software Engineer * >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> *Phone: +91 20-3058-9517 <%2B91%2020-3058-9517>Mobile: +91 >>>>>>>>>>>>>>> 976-788-8246* >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>>>>>> Yazılım Uzmanı >>>>>>>>>>>>> >>>>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>>>> Yazılım Uzmanı >>>>>>>>>>> >>>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>>>> Yazılım Uzmanı >>>>>>>>>> >>>>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>>>> Tel : +90 312 615 32 73 >>>>>>>>>> Faks : +90 312 615 32 77 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> MEHMET EMİN KARAKAŞ >>>>>>>> Yazılım Uzmanı >>>>>>>> >>>>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>>>> Tel : +90 312 615 32 73 >>>>>>>> Faks : +90 312 615 32 77 >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> MEHMET EMİN KARAKAŞ >>>>>> Yazılım Uzmanı >>>>>> >>>>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>>>> Tel : +90 312 615 32 73 >>>>>> Faks : +90 312 615 32 77 >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> MEHMET EMİN KARAKAŞ >>>> Yazılım Uzmanı >>>> >>>> TURKSAT Uluslararası Uydu ve Kablo TV Operatörü >>>> Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE >>>> Tel : +90 312 615 32 73 >>>> Faks : +90 312 615 32 77 >>>> >>> >>> >> > > > -- > MEHMET EMİN KARAKAŞ > Yazılım Uzmanı > > TURKSAT Uluslararası Uydu ve Kablo TV Operatörü > Konya Yolu 40. Km. 06839 Golbasi / ANKARA - TÜRKİYE > Tel : +90 312 615 32 73 > Faks : +90 312 615 32 77 >